Optimisation géométrique des compresseurs à spirale.
Geometric optimization of scroll compressors.
Numéro : pap. 1435
Auteurs : BAUMGART R., GELKE W., AURICH J., et al.
Résumé
Electric driven scroll compressors are widely used for the A/C systems in electric vehicles. Besides many other advantages, scroll compressors offer comparable good efficiencies and can be easily used in both the refrigeration and heat pump mode. Scroll compressors were first introduced in the early 20th century. Over the decades they have been further developed and optimized and became increasingly efficient. Among other things, numerical simulations contributed to this process. However, most of the studies focus on the optimization of the scroll wraps and their design. Investigations concerning the design and the positioning of the pre-outlet and main outlet bores are rarely present. Therefore, this contribution focuses on the optimization of the pre- and main outlet positions of scroll compressors by means of a geometrical and physical based simulation model. The first part outlines a brief introduction of the simulation model as well as the applied parameters. Subsequently, different positions of the pre- and main outlet bores for an exemplary CO2-scroll compressor with a variable wall thickness are investigated. The main focus is on their influence on the required driving power, the pressure behavior in the chambers and the mass flow rate. The investigations clarify that with an appropriate positioning of the pre- and main outlet bores the internal over-compression at low load and partial load operating points can be avoided. Simultaneously, the maximum chamber pressure at high load operating points is significantly reduced, which leads to a lower oil temperature as well as a reduction of the required driving power.
Documents disponibles
Format PDF
Pages : 10
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Geometric optimization of scroll compressors.
- Identifiant de la fiche : 30024354
- Langues : Anglais
- Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
- Date d'édition : 09/07/2018
Liens
Voir d'autres communications du même compte rendu (130)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Compresseurs;
Conditionnement d'air mobile - Mots-clés : Géometrie; Refoulement; R744; Simulation; Optimisation; Débit; Conditionnement d'air mobile; Compresseur à spirale; CO2
-
Optimization of the pre-outlet and main-outlet ...
- Auteurs : BAUMGART R., AURICH J.
- Date : 15/07/2022
- Langues : Anglais
- Source : 2022 Purdue Conferences. 26th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Simulation and optimization of scroll compresso...
- Auteurs : YANG M., YIN X., SHAO S.
- Date : 21/08/2023
- Langues : Anglais
- Source : Proceedings of the 26th IIR International Congress of Refrigeration: Paris , France, August 21-25, 2023.
- Formats : PDF
Voir la fiche
-
Simulation of 1D flow coupled with 3D multi-bod...
- Auteurs : RAMCHANDRAN L., BHATIA K., AIHARA R.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Etude sur le mécanisme de commande de la variat...
- Auteurs : HIRANO T., SHIGEOKA T.
- Date : 1992
- Langues : Japonais
- Source : Trans. JAR - vol. 9 - n. 1
Voir la fiche
-
Analyse des vibrations et conception de l'optim...
- Auteurs : LI C., WANG S.
- Date : 04/2014
- Langues : Chinois
- Source : Journal of Refrigeration - vol. 35 - n. 156
- Formats : PDF
Voir la fiche