Outil de conception numérique intégré pour les échangeurs de chaleur air-frigorigène.

[In Chinese. / En chinois.]

Auteurs : REN T., DING G., WANG T.

Type d'article : Article


In order to meet the requirement of simulating different types of heat exchangers which are widely used in refrigerating system by a simulation tool, a general 3D distributed-parameter numerical design tool, HXSIM, is introduced. A general simulation framework was adopted to establish a general purpose solver. With the help of control volume method, all types of heat exchangers can be divided into four types, which are fin-tube control volume, microchannel-fin control volume, wire-tube control volume and plate-tube control volume. There exists three objects in each control volume, which are refrigerant, air and tube fin (tube wire or tube plate), and the governing equations for each object are established according to its heat transfer and pressure drop characteristic. OpenGL was applied in building an interactive graphic user-friendly interface, and in developing HXSIM to facilitate a modular, highly flexible and customized simulation tool. The model prediction with HXSIM were verified against experimental data, which shows the maximum deviation for heat exchange capacity is within 10% and the maximum deviation for air side pressure drop is within 1.16 Pa.

Documents disponibles

Format PDF

Pages : 24-30


  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)


  • Titre original : [In Chinese. / En chinois.]
  • Identifiant de la fiche : 30005196
  • Langues : Chinois
  • Source : Journal of Refrigeration - vol. 33 - n. 144
  • Date d'édition : 04/2012


Voir d'autres articles du même numéro (10)
Voir la source