Partager

Performance du transfert de chaleur de nanofluides Cu-eau dans un système de refroidissement avec un arrangement de jets incidents.

Heat transfer performance of Cu–water nanofluids in the jet arrays impingement cooling system.

Auteurs : TIE P., LI Q., XUAN Y.

Type d'article : Article

Résumé

In this study, nanofluids were introduced into jet arrays impingement as the working fluid. The heat transfer features of the nanofluids were experimentally investigated. Four different Cu-nanoparticle volume fractions ranged from 0.17 Vol.% to 0.64 Vol.% and two dispersant sodium dodecyl benzoic sulfate (SDBS) mass concentrations varied from 0.05 wt% to 0.1 wt% were involved. The influences of the nanoparticle volume fraction and the dispersant SDBS on the heat transfer of nanofluids were discussed. The experimental results show that the suspended nanoparticles increase the heat transfer performances of the jet arrays impingement cooling system. It had also been found that compared with the case of using nanofluids without any addition of dispersant, the nanofluid with dispersant led to a great deterioration on impingement heat transfer coefficient and even the heat transfer coefficients were smaller than that of the base liquid.

Détails

  • Titre original : Heat transfer performance of Cu–water nanofluids in the jet arrays impingement cooling system.
  • Identifiant de la fiche : 30010700
  • Langues : Anglais
  • Source : International Journal of thermal Sciences - vol. 77
  • Date d'édition : 03/2014
  • DOI : http://dx.doi.org/10.1016/j.ijthermalsci.2013.11.007

Liens


Voir d'autres articles du même numéro (2)
Voir la source

Indexation