Performances comparées des raccordements de membranes EPDM (éthylène-propylène-diène terpolymère), assurés par des bandes ou liquides adhésifs.
Performance of tape-bonded seams of EPDM membranes: comparison of the peel creep-rupture response of tape-bonded and liquid-adhesive-bonded seams.
Auteurs : ROSSITER W. J. Jr, VANGEL M. G., EMBREE E., KRAFT K. M., SEILER J. F. Jr
Type de monographie : Autre
Résumé
This report presents the results of the experimentation comparing the creep-rupture response of tape-bonded and liquid-adhesive-bonded seam specimens as a function of peel load. These results may be used as a basic reference point against which the results of future creep-rupture experiments on EPDM seam specimens may be compared. Seam specimens were prepared using two tape sytems and one liquid adhesive. The results clearly indicate that, in general, the tape-bonded specimens had times-to-failure that were comparable to, or were greater than, those of the liquid-adhesive-bonded specimens. (See also the following abstract.)
Détails
- Titre original : Performance of tape-bonded seams of EPDM membranes: comparison of the peel creep-rupture response of tape-bonded and liquid-adhesive-bonded seams.
- Identifiant de la fiche : 1998-3969
- Langues : Anglais
- Édition : NIST (National Institute of Standards and Technology) - États-unis/États-unis
- Date d'édition : 05/1996
- Collection : NIST Building Science Series
- Source : Source : n. 175; 63 p. (21.5 x 27.9); fig.; tabl.; append.
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Indexation
- Thèmes : Circulation du fluide : tuyauterie, régulation, automatisme, sécurité
- Mots-clés : Soudure; Étancheite; Plastique; Joint; Toiture; Comparaison; Immeuble; Propriété mécanique; Panne; Matériau; Film; États-Unis; Essai
-
Performance of tape-bonded seams of EPDM membra...
- Auteurs : ROSSITER W. J. Jr, VANGEL M. G., KRAFT K. M., FILLIBEN J. J.
- Date : 05/1997
- Langues : Anglais
Voir la fiche
-
Test procedures for developing solder data.
- Auteurs : NIST, SIEWERT T. A., HANDWERKER C. A.
- Date : 2003
- Langues : Anglais
Voir la fiche
-
Sealed glass tube method to test the chemical s...
- Auteurs : ASHRAE
- Date : 2007
- Langues : Anglais
Voir la fiche
-
Choix des matériaux en conception mécanique + C...
- Auteurs : ASHBY M. F.
- Date : 10/2000
- Langues : Français
Voir la fiche
-
Cuivre et alliages de cuivre. Tubes ronds sans ...
- Auteurs : AFNOR
- Date : 10/2001
- Langues : Français
Voir la fiche