Prévisions des chutes de pression de refroidissement dans un tube pour du CO2 mélangé avec de l'huile lubrifiante à des pressions supercritiques.

Predictions of in-tube cooling pressure drops for CO2 mixed with lubricating oil at supercritical pressures.

Auteurs : ZHAO C. R., JIANG P. X.

Type d'article : Article

Résumé

The in-tube cooling pressure drop characteristics of supercritical pressure CO2 mixed with small amounts of lubricating oil are different with those for pure CO2, and are closely related to oil type. The effects of two typical oils, the POE oil, which has good miscibility with supercritical pressure CO2, and the PAG oil with poor miscibility, on the in-tube cooling pressure drops of supercritical pressure CO2 are compared and analyzed in the present paper. An empirical correlation is developed for POE oil with factors accounting for the oil concentration, the density and viscosity ratios of the oil to the CO2 which predicts most of the experimental data within 10%. For cases with entrained PAG oil, the solubility which heavily influences the flow patterns of the CO2-oil mixture, is included in addition to the above mentioned factors when correlating the experimental data. The correlation predicts the measured data within 20%.

Détails

  • Titre original : Predictions of in-tube cooling pressure drops for CO2 mixed with lubricating oil at supercritical pressures.
  • Identifiant de la fiche : 30014557
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 73 - n. 1
  • Date d'édition : 12/2014
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2014.07.072

Liens


Voir d'autres articles du même numéro (44)
Voir la source