Production d'électricité à partir de système de récupération de chaleur extraite utilisant des cellules thermoélectriques et des caloducs.
Electricity generation from an exhaust heat recovery system utilising thermoelectric cells and heat pipes.
Résumé
The internal combustion engine used in majority of cars at the present time do not use their fuel input very efficiently. A majority of this energy is dissipated as heat in the exhaust. The related problems of global warming and dwindling fossil fuel supplies has led to improving the efficiency of the internal combustion engine being a priority. One method to improve the efficiency is to develop methods to utilise heat in car exhausts that is usually wasted. Two promising technologies that were found to be useful for this purpose were thermoelectric cells (TECs) and heat pipes. Therefore this project involved making a bench type, proof of concept model of power production by thermoelectric cells using heat pipes and hot engine exhaust gases. 8 cells were used and managed to produce 6.03 W when charging the battery. The system operated with a heat to electricity conversion efficiency of 1.43%. The discrepancy between the actual efficiency and the predicted efficiency of 2.31% is most likely due to the cells not operating at their optimum voltage. The predicted efficiency is approximately 1/9 of the Carnot efficiency and the actual efficiency is approximately 1/15 of the Carnot efficiency.
Détails
- Titre original : Electricity generation from an exhaust heat recovery system utilising thermoelectric cells and heat pipes.
- Identifiant de la fiche : 30014828
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 73 - n. 1
- Date d'édition : 12/2014
- DOI : http://dx.doi.org/10.1016/j.applthermaleng.2014.07.056
Liens
Voir d'autres articles du même numéro (44)
Voir la source
Indexation
- Thèmes : Domaines connexes au froid
- Mots-clés : Caloduc; Thermoélectricité; Récuperation de chaleur; Puissance; Experimentation; Efficacité énergétique
-
Evaluation of a tracking flat-plate solar colle...
- Auteurs : MAIA C. B., FERREIRA A. G., HANRIOT S. M.
- Date : 12/2014
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 73 - n. 1
Voir la fiche
-
Choice of insulation standard for pipe networks...
- Auteurs : LUND R., MOHAMMADI S.
- Date : 05/04/2016
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 98
Voir la fiche
-
The effects of rooflights on energy performance...
- Auteurs : HASAN M. M., CHONG H.-Y., DUTTA A. K., et al.
- Date : 06/2018
- Langues : Anglais
- Source : EcoLibrium - vol. 17 - n. 5
- Formats : PDF
Voir la fiche
-
Low-temperature ash deposition and dewpoint cor...
- Auteurs : CHEN H., PAN P., JIAO J., et al.
- Date : 05/05/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 117
Voir la fiche
-
Fouling of the flue gas cooler in a large-scale...
- Auteurs : CHEN H., PAN P., CHEN X., et al.
- Date : 05/05/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 117
Voir la fiche