Document IIF
R123 en ébullition libre : effet de la concentration globale en lubrifiant sur l'accroissement de sa densité superficielle.
Effect of bulk lubricant concentration on the excess surface density during R123 pool boiling.
Auteurs : KEDZIERSKI M. A.
Type d'article : Article, Article de la RIF
Résumé
This paper investigates the effect that bulk lubricant concentration has on the non-adiabatic lubricant excess surface density on a roughened, horizontal flat (plain) pool-boiling surface. Both pool boiling heat transfer data and lubricant excess surface density data are given for pure R123 and three different mixtures of R123 and a naphthenic mineral oil. A spectrofluorometer was used to measure the lubricant excess density that was established by the boiling of a R123/lubricant mixture on a test surface. The fluorescent technique was used to measure the effect of bulk lubricant concentration on the lubricant excess layer during refrigerant/lubricant mixture boiling. The refrigerant preferentially boils, thus, concentrating and accumulating the lubricant on the surface in excess of the bulk concentration. The excess lubricant resides in a very thin layer on the surface and influences the boiling performance. Accordingly, the ability to measure the effect of bulk lubricant composition on the lubricant excess density and in turn the effect on the heat transfer would lead to a fundamental understanding of the mechanism by which lubricants can degrade or improve boiling performance. In support of this effort, heat transfer data are provided for pure R123 and three R123/lubricant mixtures at 277.6 K. For heat fluxes between approximately 25 to 45 kW/m2, an average enhancement of the heat flux of 9 and 5% was achieved for the 0.5 and 1% lubricant mass fractions, respectively, and an average degradation of 5% in the heat flux was obtained for the 1.8% lubricant mass fraction mixture.
Documents disponibles
Format PDF
Pages : 1062-1071
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Effect of bulk lubricant concentration on the excess surface density during R123 pool boiling.
- Identifiant de la fiche : 2003-1687
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 25 - n. 8
- Date d'édition : 12/2002
Liens
Voir d'autres articles du même numéro (16)
Voir la source
Indexation
-
Thèmes :
Transfert de masse;
Lubrifiants - Mots-clés : Ébullition libre; Transfert de masse; Lubrifiant; Transfert de chaleur; Masse volumique; Surface; Mélange; Concentration
-
Effect of bulk lubricant concentration on the e...
- Auteurs : KEDZIERSKI M. A.
- Date : 06/2005
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 28 - n. 4
- Formats : PDF
Voir la fiche
-
Pool boiling heat transfer of different refrige...
- Auteurs : MOHRLOK K., SPINDLER K., HAHNE E., et al.
- Date : 03/10/2001
- Langues : Anglais
- Source : Thermophysical Properties and Transfer Processes of New Refrigerants.
- Formats : PDF
Voir la fiche
-
Effect of concentration on R134a/Al2O3 nanolubr...
- Auteurs : KEDZIERSKI M. A.
- Date : 01/2015
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 49
- Formats : PDF
Voir la fiche
-
A study of pool boiling heat transfer on horizo...
- Auteurs : CHIEN L. H., TSAI Y. L., CHANG C. H.
- Date : 16/08/2015
- Langues : Anglais
- Source : Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
- Formats : PDF
Voir la fiche
-
NUCLEATE POOL BOILING OF HYDROCARBON MIXTURES O...
- Auteurs : THOME J. R.
- Date : 1989
- Langues : Anglais
- Source : Heat Transf. Eng. - vol. 10 - n. 1
Voir la fiche