Résumé
In this paper, the single-cylinder rotary compression system with vapor injection is applied in heat pump system to solve the problems of insufficient heating capacity and lower efficiency during lower ambient conditions. The system performances of single-cylinder rotary compression system with vapor injection (called single-cylinder system), dual-cylinder rotary compression system with vapor injection (called dual-cylinder system) and single stage compression system were comparatively tested under the different heating conditions in psychrometric room. The results show that the single-cylinder system has a higher heating capacity compared with single stage compression system when the outdoor temperature is above -15°C,and the rates of increase is above 12%. The rate of increase is increased along with the decrease of ambient air temperature. The heating capacity and COP of single-cylinder system are higher than that of the dual-cylinder system, and the increasing ranges are 2.29%, 1.94% respectively. When the outdoor temperature is below -15°C, single stage compression system would not operate normally due to the higher discharge temperature. The heating capacity and COP of dual-cylinder system are higher than that of the single-cylinder system, and the increasing ranges are 4.5%, 9.42% respectively. Therefore, the single-cylinder system is suitable for the conditions of outdoor temperature above -15°C, while the dual-cylinder system is suitable for the conditions of outdoor temperature below -15°C.
Documents disponibles
Format PDF
Pages : 65-70
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : [In Chinese. / En chinois.]
- Identifiant de la fiche : 30020624
- Langues : Chinois
- Source : Journal of Refrigeration - vol. 36 - n. 162
- Date d'édition : 04/2015
Liens
Voir d'autres articles du même numéro (9)
Voir la source
Indexation
-
Thèmes :
Techniques des pompes à chaleur;
Systèmes à compression - Mots-clés : Vapeur; Pompe à chaleur; Performance; Injection; Compresseur rotatif; Chauffage
-
Research on vapor-injected rotary compressor th...
- Auteurs : DING Y., WANG B., SHI W.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Effects of vapor injection techniques on the he...
- Auteurs : BAEK C., HEO J., JUNG J., et al.
- Date : 07/2014
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 43
- Formats : PDF
Voir la fiche
-
Experimental investigation on vapor injection h...
- Auteurs : YAN G., JIA Q., BAI T.
- Date : 02/2016
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 62
- Formats : PDF
Voir la fiche
-
Experimental study on two-stage compression ref...
- Auteurs : XU S., MA G.
- Date : 01/2014
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 62 - n. 2
Voir la fiche
-
Effect of different injection vapor modes on th...
- Auteurs : LIU B., GU S., CHEN A., et al.
- Date : 20/07/2017
- Langues : Anglais
- Source : 8th international conference on compressors and refrigeration, 2017.
- Formats : PDF
Voir la fiche