Sélection d'un fluide actif pour un système de refroidissement à éjecteur soumis à des conditions de fonctionnement variables.
Selection of the working fluid for an ejector cooling system with variable operating conditions.
Numéro : pap. B-19
Auteurs : VARGA S., LEBRE P. S., OLIVEIRA A. C., et al.
Résumé
A number of factors influence the performance of an ejector, e.g. working fluid, geometry and operating conditions. In this work, six low environmental impact working fluids were evaluated for their use in an ejector cooling system running on low temperature thermal energy source, like solar thermal. The numerical analysis was based on a model applying the 1D constant pressure mixing theory. Ejector performance was assessed for generator, evaporator and condenser temperatures in the range of 80-120, 5-15 and 25-40°C, respectively. It was concluded that isobutane (R600a) is a good choice for a refrigerant in such a system, due to its high COP and moderate operating pressures throughout the entire cycle. The results also indicate that the area ratio required for operating the ejector in critical mode, under variable generator and condenser conditions, varied in a significant range regardless of the selected refrigerant. This clearly indicates the importance of a variable geometry ejector design to strengthen the position of ejector cooling systems among other refrigeration technologies.
Documents disponibles
Format PDF
Pages : 12 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Selection of the working fluid for an ejector cooling system with variable operating conditions.
- Identifiant de la fiche : 30004506
- Langues : Anglais
- Sujet : Alternatives aux HFC
- Source : CYTEF 2012. VI Congreso Ibérico y IV Congreso Iberoamericano de Ciencias y Técnicas del Frío, Madrid, España, 22-24 de febrero, 2012.
- Date d'édition : 22/02/2012
Liens
Voir d'autres communications du même compte rendu (76)
Voir le compte rendu de la conférence
Indexation
-
Modeling of mini-ejection cooling systems.
- Auteurs : BUTRYMOWICZ D., SMIERCIEW K., KARWACKI J., et al.
- Date : 21/08/2011
- Langues : Anglais
- Source : Proceedings of the 23rd IIR International Congress of Refrigeration: Prague, Czech Republic, August 21-26, 2011. Overarching theme: Refrigeration for Sustainable Development.
- Formats : PDF
Voir la fiche
-
The vapour ejector autonomous refrigerator char...
- Auteurs : BUKRABA M. A., BUZ V. N., GONCHAROV K. A., SMIRNOV H. F.
- Date : 12/09/1995
- Langues : Anglais
- Source : International seminar and workshop on heat pipes, heat pumps, refrigerators and dual-use technologies. Preprints.
Voir la fiche
-
Ejector refrigeration cycle with jet pump as ex...
- Auteurs : YU J. L., ZHAO H., PU H. H.
- Date : 21/08/2007
- Langues : Anglais
- Source : ICR 2007. Refrigeration Creates the Future. Proceedings of the 22nd IIR International Congress of Refrigeration.
- Formats : PDF
Voir la fiche
-
Joint research on ejector cooling technology.
- Auteurs : HUANG B. J., CHANG J. M., PETRENKO V. A., et al.
- Date : 2001
- Langues : Anglais
- Source : Non-compression refrigeration and cooling. Proceedings of the Second International Workshop.
Voir la fiche
-
Performance of two-phase ejector of various geo...
- Auteurs : BUTRYMOWICZ D., KARWACKI J., MIASKOWSKA D., et al.
- Date : 21/08/2007
- Langues : Anglais
- Source : ICR 2007. Refrigeration Creates the Future. Proceedings of the 22nd IIR International Congress of Refrigeration.
- Formats : PDF
Voir la fiche