Document IIF
Solutions analytiques pour les échangeurs de chaleur à contre-courant soumis à un flux de chaleur externe et une conduction axiale.
Analytical solutions to counter-flow heat exchanger subjected to external heat flux and axial conduction.
Auteurs : AMINUDDIN M., ZUBAIR S. M.
Type d'article : Article, Article de la RIF
Résumé
A counter-flow heat exchanger with longitudinal conduction in separating wall is analyzed along with external heat flux. The inhomogeneous system of model equations is solved with the method of variation of parameters. Closed-form expressions are obtained for balanced flow with three types of wall end-conditions and the zero heat in-leak limit verified against reported expressions. In addition, analytical solution is derived for the general unbalanced flow model with non-adiabatic wall ends that is validated against the limiting case of no axial conduction. It enables examining property variations and arbitrary external load by dividing the system into smaller segments and applying the derived expressions to each element. Heat in-leak has higher impact on deterioration in the low NTU region studied when directed toward the hot fluid. As the external parasitic enhances with NTU, a critical NTU is noted in the range 2.8–5.1 for the various cases analyzed. At this optimum condition, the net energy reaching colder stages is between 27% and 55%.
Documents disponibles
Format PDF
Pages : 20-35
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Analytical solutions to counter-flow heat exchanger subjected to external heat flux and axial conduction.
- Identifiant de la fiche : 30019966
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 74
- Date d'édition : 02/2017
Liens
Voir d'autres articles du même numéro (56)
Voir la source
Indexation
-
Pruebas in situ de un nuevo enfriador evaporati...
- Auteurs : BRUNO F.
- Date : 10/2011
- Langues : Espagnol
- Source : Frío Calor Aire acondicionado - vol. 39 - n. 440
- Formats : PDF
Voir la fiche
-
JEDAN. Model za optimizaciju karakteristicne te...
- Auteurs : PEJOVIC B., TADIC G., MICIC V., et al.
- Date : 05/2014
- Langues : Serbe
- Source : KGH (Klimatizacija Grejanje Hladenje) - vol. 43 - n. 2
Voir la fiche
-
Skutecznosc przeciwpradowego posredniego wymien...
- Auteurs : PANDELIDIS D.
- Date : 02/2014
- Langues : Polonais
- Source : Chlodnictwo - vol. 49 - n. 2
Voir la fiche
-
Nanofluid as a coolant for electronic devices (...
- Auteurs : IJAM A., SAIDUR R.
- Date : 01/2012
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 32
Voir la fiche
-
Flow boiling in micro-scale channels: synthesiz...
- Auteurs : TIBIRIÇÁ C. B., RIBATSKI G.
- Date : 03/2013
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 36 - n. 2
- Formats : PDF
Voir la fiche