Partager

Un nanofluide pour refroidir les dispositifs électroniques.

Nanofluid as a coolant for electronic devices (cooling of electronic devices).

Auteurs : IJAM A., SAIDUR R.

Type d'article : Article

Résumé

Nanofluids are the suspension of ultrafine solid nanoparticles in a base fluid. Nanofluids are expected to be a promising coolant candidate for thermal management system of next generation high heat dissipation electronic systems. Nanofluids are used with different volume fractions. A minichannel heat sink with a 20 x 20 cm bottom is analyzed for SiC-water nanofluid and TiO2-water nanofluid turbulent flow as coolants through hydraulic diameters. The results showed that enhancement in thermal conductivity by dispersed SiC in water at 4% volume fraction was 12.44% and by dispersed TiO2 in water was 9.99% for the same volume fraction. It was found that by using SiC-water nanofluid as a coolant instead of water, an improvement of approximately 7.25%-12.43% could be achieved and by using TiO2-water 7.63%-12.77%. The maximum pumping power by using SiC-water nanofluid at 2 m/s and 4% vol. was 0.28Wand at 6 m/ s and 4% volume equal to 5.39 W. By using TiO2-water nanofluid at 2 m/s and 4% vol. it was found to be 0.29 W and 5.64 W at 6 m/s with the same volume of 4%.

Détails

  • Titre original : Nanofluid as a coolant for electronic devices (cooling of electronic devices).
  • Identifiant de la fiche : 30005521
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 32
  • Date d'édition : 01/2012
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2011.08.032

Liens


Voir d'autres articles du même numéro (5)
Voir la source

Indexation