Partager

Document IIF

Transfert de chaleur dans une boucle diphasique d'un thermosiphon de pointe.

Heat transfer in the evaporator of an advanced two-phase thermosiphon loop.

Auteurs : KHODABANDEH R.

Type d'article : Article, Article de la RIF

Résumé

As heat generation from electronic components increases and the limit of air cooling is reached, interest in using liquid cooling for high heat flux applications has risen. Thermosiphon cooling is an alternative liquid cooling technique, in which heat is transferred as heat of vaporization from evaporator to condenser with a relatively small temperature difference. The effect of fluid properties, the structure of wall surfaces, and the effect of system pressure was investigated and reported previously by the author. In this article, the influence of heat flux, system pressure, mass flow rate, vapour fraction, diameter of evaporator channel and tubing distance between evaporator and condenser on the heat transfer coefficient of an advanced two-phase thermosiphon loop is reported. The tested evaporators were made from small blocks of copper with 7, 5, 4, 3 and 2 vertical channels with the diameters of 1.1, 1.5, 1.9, 2.5, and 3.5 mm, respectively and the length of 14.6 mm. Tests were done with isobutane at heat fluxes ranging between 28.3 and 311.5 kW/m2.

Documents disponibles

Format PDF

Pages : 190-202

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Heat transfer in the evaporator of an advanced two-phase thermosiphon loop.
  • Identifiant de la fiche : 2005-1744
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 28 - n. 2
  • Date d'édition : 03/2005

Liens


Voir d'autres articles du même numéro (15)
Voir la source

Indexation