Document IIF

Transfert de chaleur diphasique et visualisation à grande vitesse de l'écoulement de frigorigènes à l'intérieur de microcanaux multiples en silicium d'une taille de 100 × 100 µm2.

Two-phase heat transfer and high-speed visualization of refrigerant flows in 100 × 100 µm2 silicon multi-microchannels.

Auteurs : SZCZUKIEWICZ S., BORHANI N., THOME J. R.

Type d'article : Article, Article de la RIF

Résumé

Two-phase flow boiling of R245fa, R236fa, and R1234ze(E) in 100 × 100 µm2 parallel microchannels for cooling of future 3D-ICs has been investigated. Significant flow instabilities, back flow, and non-uniform flow distribution among the channels were observed in the micro-evaporator without any inlet restrictions (micro-orifices). Therefore, to prevent such problems, rectangular restrictions were placed at the inlet of each channel and the two-phase flow flashed by the micro-orifices was identified as the most optimal operating condition. In the present study, a novel in-situ pixel-by-pixel technique was developed to calibrate the raw infra-red images, thus converting them into two-dimensional temperature fields of 10’000 pixels over the test section surface operating at 60 Hz. Tests showed that the base heat flux of 48.6 W/cm2 could be dissipated whilst keeping the micro-evaporator’s temperature below 85°C.

Documents disponibles

Format PDF

Pages : 402-413

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Two-phase heat transfer and high-speed visualization of refrigerant flows in 100 × 100 µm2 silicon multi-microchannels.
  • Identifiant de la fiche : 30007079
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 36 - n. 2
  • Date d'édition : 03/2013

Liens


Voir d'autres articles du même numéro (26)
Voir la source