Document IIF
Transfert de chaleur par ébullition en écoulement de R513A à l’intérieur d’un tube lisse horizontal et d’un tube à micro-ailettes.
R513A flow boiling heat transfer inside horizontal smooth tube and microfin tube.
Auteurs : DIANI A., ROSSETTO L.
Type d'article : Article, Article de la RIF
Résumé
This paper presents experimental results for R513A flow boiling inside a 3.5 mm ID horizontal smooth tube and inside a 3.4 mm ID horizontal microfin tube. R513A is an azeotropic mixture made of R1234yf and R134a (56% and 44% in mass), and it is proposed as a direct substitute of the common R134a. The flow boiling heat transfer coefficients are measured for mass velocity ranging between 150 and 800 kg m -2 s -1 , for heat fluxes from 12 to 60 kW m -2 , at a saturation temperature at the inlet of the test section of 20 °C. The effects of mass velocity, heat flux and vapor quality on the thermal performance are analyzed both for the smooth tube and for the microfin tube. The heat transfer enhancement of the microfin tube compared to the smooth tube is also presented. The comparison reveals that the microfin tube considerably augments the heat transfer coefficient especially at low mass velocity, whereas at high mass velocity microfin tube and smooth tube show almost the same heat transfer coefficient. Finally, the collected experimental heat transfer coefficients are compared against values predicted by empirical correlations available in the open literature.
Documents disponibles
Format PDF
Pages : 301-314
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : R513A flow boiling heat transfer inside horizontal smooth tube and microfin tube.
- Identifiant de la fiche : 30026986
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 107
- Date d'édition : 11/2019
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2019.07.023
Liens
Voir d'autres articles du même numéro (32)
Voir la source
-
Development of boiling flow pattern map and hea...
- Auteurs : LI G., ZHUANG D., XIE L., DING G., YUE B., FAN B., ZHANG H., SHAO Y.
- Date : 11/2023
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 155
- Formats : PDF
Voir la fiche
-
The fluid flow and heat transfer characteristic...
- Auteurs : MUDHAFAR M. A. H., PAN H. Y.
- Date : 07/2022
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 139
- Formats : PDF
Voir la fiche
-
A comprehensive assessment of two-phase flow bo...
- Auteurs : VIDHYARTHI N. K., DEB S., GAJGHATE S. S., PAL S., DAS D. C., DAS A. K., SAHA B. B.
- Date : 02/2023
- Langues : Anglais
- Source : Energies - vol. 16 - n. 4
- Formats : PDF
Voir la fiche
-
A review on flow boiling enhancement on texture...
- Auteurs : MERTENS F., CASTAGNE S., VETRANO M. R.
- Date : 02/2024
- Langues : Anglais
- Source : Energies - vol. 17 - n. 3
- Formats : PDF
Voir la fiche
-
A new flow pattern map for flow boiling of R410...
- Auteurs : YANG C.-M., HRNJAK P.
- Date : 01/2020
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 109
- Formats : PDF
Voir la fiche