Utilisation de la chaleur perdue comme source d’énergie pour un système frigorifique à absorption dans un bateau.
Using waste heat of ship as energy source for an absorption refrigeration system.
Auteurs : SALMI W., VANTTOLA J., ELG M., et al.
Type d'article : Article
Résumé
This work presents a steady-state thermodynamic model for absorption refrigeration cycles with water-LiBr and ammonia-water working pairs for purpose of application on a ship. The coefficient of performance was studied with different generator and evaporator temperatures in ISO and tropical conditions. Absorption refrigeration systems were examined using exhaust gases, jacket water, and scavenge air as energy sources. Optimal generator temperatures for different refrigerant temperatures were found using different waste heat sources and for the absorption cycle itself. Critical temperature values (where the refrigeration power drops to zero) were defined. All of these values were used in order to evaluate the cooling power and energy production possibilities in a bulk carrier. The process data of exhaust gases and cooling water flows in two different climate conditions (ISO and tropical) and operation profiles of a B. Delta37 bulk carrier were used as initial data in the study. With the case ship data, a theoretical potential of saving of 70% of the electricity used in accommodation (AC use) compressor in ISO conditions and 61% in tropical conditions was recognized. Those estimates enable between 47 and 95 tons of annual fuel savings, respectively. Moreover, jacket water heat recovery with a water-LiBr system has the potential to provide 2.2–4.0 times more cooling power than required during sea-time operations in ISO conditions, depending on the main engine load.
Détails
- Titre original : Using waste heat of ship as energy source for an absorption refrigeration system.
- Identifiant de la fiche : 30021173
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 115
- Date d'édition : 25/03/2017
- DOI : http://dx.doi.org/10.1016/j.applthermaleng.2016.12.131
Liens
Voir d'autres articles du même numéro (31)
Voir la source
Indexation
- Thèmes : Systèmes à absorption et adsorption
- Mots-clés : Navire; Bromure de lithium; Ammoniac; Système à absorption; Modélisation; Chaleur perdue
-
Modelling non-isothermal absorption of vapour i...
- Auteurs : ACOSTA-IBORRA A., GARCÍA N., SANTANA D.
- Date : 06/2009
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 52 - n. 13-14
Voir la fiche
-
COMPUTER SIMULATION AND ANALYSIS OF ABSORPTION ...
- Auteurs : GROSSMAN G.
- Date : 1990
- Langues : Anglais
- Source : Thermophysical properties of pure substances and mixtures for refrigeration.
- Formats : PDF
Voir la fiche
-
A COMPUTER MODEL FOR SIMULATION OF ABSORPTION S...
- Auteurs : GROSSMAN G., GOMMED K., GADOTH D.
- Date : 1987
- Langues : Anglais
Voir la fiche
-
Analysis of NH3-H2O-LiBr absorption refrigerati...
- Auteurs : LIANG Y., LI S., YUE X., et al.
- Date : 25/03/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 115
Voir la fiche
-
Analysis of ammonia/water and ammonia/salt mixt...
- Auteurs : TÁBOAS F., BOUROUIS M., VALLÈS M.
- Date : 05/2014
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 66 - n. 1-2
Voir la fiche