Share

Using waste heat of ship as energy source for an absorption refrigeration system.

Author(s) : SALMI W., VANTTOLA J., ELG M., et al.

Type of article: Article

Summary

This work presents a steady-state thermodynamic model for absorption refrigeration cycles with water-LiBr and ammonia-water working pairs for purpose of application on a ship. The coefficient of performance was studied with different generator and evaporator temperatures in ISO and tropical conditions. Absorption refrigeration systems were examined using exhaust gases, jacket water, and scavenge air as energy sources. Optimal generator temperatures for different refrigerant temperatures were found using different waste heat sources and for the absorption cycle itself. Critical temperature values (where the refrigeration power drops to zero) were defined. All of these values were used in order to evaluate the cooling power and energy production possibilities in a bulk carrier. The process data of exhaust gases and cooling water flows in two different climate conditions (ISO and tropical) and operation profiles of a B. Delta37 bulk carrier were used as initial data in the study. With the case ship data, a theoretical potential of saving of 70% of the electricity used in accommodation (AC use) compressor in ISO conditions and 61% in tropical conditions was recognized. Those estimates enable between 47 and 95 tons of annual fuel savings, respectively. Moreover, jacket water heat recovery with a water-LiBr system has the potential to provide 2.2–4.0 times more cooling power than required during sea-time operations in ISO conditions, depending on the main engine load.

Details

  • Original title: Using waste heat of ship as energy source for an absorption refrigeration system.
  • Record ID : 30021173
  • Languages: English
  • Source: Applied Thermal Engineering - vol. 115
  • Publication date: 2017/03/25
  • DOI: http://dx.doi.org/10.1016/j.applthermaleng.2016.12.131

Links


See other articles in this issue (31)
See the source

Indexing