Partager

Analyse du cycle d'une pompe à chaleur utilisant un mélange de frigorigènes CO2/DME.

Ciclo de la bomba de calor: análisis con mezcla refrigerante CO2/DME.

Auteurs : ONAKA Y., MIYARA A., TSUBAKI K., et al.

Type d'article : Article

Résumé

This article is the Spanish translation of an article presented at the 12th International Refrigeration and Air Conditioning Conference, Purdue University, USA (see the Bulletin of the IIR, reference 2009-0378). In this study, the performance analysis of a heat pump cycle using carbon dioxide (CO2) and dimethyl ether (DME) non-azeotropic mixture has been carried out by cycle calculation in order to clarify the characteristics and COP of CO2/DME heat pump cycle. The calculation conditions were established as a hot-water supply system and the calculations were conducted by considering the heat transfer between the refrigerant and heat source/sink water. The heat pump cycle is formed around the critical point for high CO2 concentration mixtures and it is formed under the critical point for low CO2 concentration mixtures. The COP has the maximum at a certain pressure for each mixture and the COPs of the mixture and pure DME are higher than that of pure CO2. Operating pressure and refrigerant mass flow rate decreases with increase of DME concentration. The effects of concentration on characteristics of the cycle have also been discussed.

Documents disponibles

Format PDF

Pages : pp. 34-40

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Ciclo de la bomba de calor: análisis con mezcla refrigerante CO2/DME.
  • Identifiant de la fiche : 2010-1297
  • Langues : Espagnol
  • Source : Frío Calor Aire acondicionado - vol. 38 - n. 427
  • Date d'édition : 07/2010

Liens


Voir d'autres articles du même numéro (1)
Voir la source

Indexation