Résumé
Previous work has identified that energy consumption and CO2 emissions can be reduced by using air cycle heating and cooling in some types of buildings. In the paper a 100 kilowatt packaged water chiller and heater was investigated to identify the best configuration of components and to establish their physical size and performance characteristics. The resulting cooling and heating output, shaft power and electrical input power to the system for a range of control options in different ambient temperatures are shown. The system provided chilled water (6 deg C) and hot water (81 deg C) accross all load and ambient conditions. The system could be easily controlled for a range of cooling and/or heating duties, 0 to 81 kilowatts of cooling coincident with 210 kilowatts of heating. In the summer design case of 100 kilowatts cooling, a requirement of 10 kilowatts water heating was assumed. The design is technically viable and the component characteristics are typical of the equipment types. For a 100 kilowatt cooling load the turbo-machinery required is larger than those made for aerospace environmental control systems, but not the chemical process sector. A detailed design of the switched reluctance motor to drive the compressor will be required but its size and general construction is not unusual. The type of heat exchangers proposed are already manufactured for the chemical process sector.
Documents disponibles
Format PDF
Pages : 9 p.
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Packaged air cycle machine for heating and cooling buildings.
- Identifiant de la fiche : 1999-1574
- Langues : Anglais
- Source : Hygiene, Quality and Safety in the Cold Chain and Air Conditioning.
- Date d'édition : 16/09/1998
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Liens
Voir d'autres communications du même compte rendu (39)
Voir le compte rendu de la conférence
-
Heating and cooling of buildings with air cycles.
- Auteurs : GIGIEL A., RUSSELL S., BUTLER D. J. G.
- Date : 20/03/2000
- Langues : Anglais
Voir la fiche
-
Developments of reverse open air-cycle systems ...
- Auteurs : CAPPELLI D'ORAZIO M., CIANFRINI C., CORCIONE M., et al.
- Date : 15/09/2001
- Langues : Anglais
- Source : CLIMA 2000. 7th REHVA World Congress, Naples 2001 [CD-ROM + Hard-copy abstracts].
Voir la fiche
-
Développement de cycles à air inverses : problè...
- Auteurs : YASTREBOVA L. V., MOROSUK L. I., SELIVANOV A. P., et al.
- Date : 2000
- Langues : Russe
- Source : Holodil'na Tehnika i Tehnologiâ - n. 66
Voir la fiche
-
Heating and cooling of buildings with air cycles.
- Date : 04/2000
- Langues : Anglais
- Source : FRPERC, Air Cycle spec. Interest Group Newsl. - n. 9
Voir la fiche
-
Using air for cooling.
- Auteurs : BUTLER D. J. G., GIGIEL A., RUSSELL S.
- Date : 02/07/2001
- Langues : Anglais
Voir la fiche