Partager

Document IIF

Caractéristiques de fabrication des matériaux à changement de phase composés de microcapsules à coque dure en silice.

Fabrication characteristics of phase-change materials of silica hard-shell microcapsules.

Numéro : pap. 29

Auteurs : SUZUKI H., TAMARU M., HIDEMA R., et al.

Résumé

A novel fabrication technique of hard-shell microcapsules (HSMC) containing trimethylolethane hydrate as a phase change material has been tested with double nozzle method. The inner and the outer diameters of the inner nozzle and the inner diameter of the outer nozzle of the double nozzle were fixed at 0.24, 0.46 and 0.8 mm, respectively. The inner/outer flow ratio was changed from 2.50 to 5.00, while the flow rate injected from the outer nozzle was kept constant at 2 ml/h. From the results, it was found that the mean diameter of capsules is 1.58 mm when the flow rate ratio is 2.50. In this case, a reasonable latent heat was also obtained. Thus, it was concluded that the present method for the fabrication of the capsules containing the trimethylolethane hydrate can be a promising method.

Documents disponibles

Format PDF

Pages : 8

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Fabrication characteristics of phase-change materials of silica hard-shell microcapsules.
  • Identifiant de la fiche : 30017849
  • Langues : Anglais
  • Source : 11th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: Karlsruhe, Germany, May 18-20, 2016.
  • Date d'édition : 18/05/2016
  • DOI : http://dx.doi.org/10.18462/iir.pcm.2016.0029

Liens


Voir d'autres communications du même compte rendu (31)
Voir le compte rendu de la conférence

Indexation