Document IIF
Caractéristiques de l'ébullition en écoulement et visualisation de la configuration de l'écoulement des mélanges frigorigène/huile de lubrification.
Flow boiling characteristics and flow pattern visualization of refrigerant/lubricant oil mixtures.
Auteurs : BANDARRA FILHO E. P., CHENG L., THOME J. R.
Type d'article : Article, Article de la RIF
Résumé
A comprehensive review of flow boiling characteristics and flow pattern visualization of refrigerant/lubricant oil mixtures is presented in this paper. First, various parameters influenced by the lubricant oil in convective boiling of refrigerants, such as mass velocity, vapour quality, oil concentration and geometric characteristics of the heat transfer tube are discussed. The effects of the unavoidable introduction of the lubricant oil on the thermodynamics properties of a refrigerant are described. Then, a review of the main experimental studies of flow boiling of refrigerant/lubricant oil mixtures is presented and also describes research with halocarbons, carbon dioxide, hydrocarbons and ammonia. There is no agreement among these studies regarding the effect of the oil in the evaporator, with studies showing an increase or decrease in the heat transfer coefficient. However, in relation to pressure drop, all the results presented the same trend, increasing the pressure drop with increasing oil concentration. Next, the flow patterns of refrigerant/oil mixtures are illustrated together with a selection of video images. It is possible to notice the difference in frothing formation with respect to the particular refrigerant and tube geometry. Some predictions of oil effects on the heat transfer coefficient and pressure drops based on the mixture physical properties are then presented and the trends compared to data. Finally, some suggestions for future work are given.
Documents disponibles
Format PDF
Pages : 185-202
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Flow boiling characteristics and flow pattern visualization of refrigerant/lubricant oil mixtures.
- Identifiant de la fiche : 2009-0538
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 32 - n. 2
- Date d'édition : 03/2009
Liens
Voir d'autres articles du même numéro (16)
Voir la source
Indexation
- Thèmes : Lubrifiants
- Mots-clés : Vitesse (fluides); Imagerie; Lubrifiant; Transfert de chaleur; Mélange; Huile; Écoulement; Frigorigène; Ébullition; Distribution; Chute de pression
-
New prediction methods for CO2 evaporation insi...
- Auteurs : CHENG L., RIBATSKI G., QUIBÉN J. M., et al.
- Date : 01/2008
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 51 - n. 1-2
Voir la fiche
-
CO2 and R410A flow boiling heat transfer, press...
- Auteurs : PARK C. Y., HRNJAK P. S.
- Date : 01/2007
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 30 - n. 1
- Formats : PDF
Voir la fiche
-
Flow boiling and pressure drop measurements for...
- Auteurs : ZUERCHER O., THOME J. R., FAVRAT D.
- Date : 01/1997
- Langues : Anglais
- Source : HVAC&R Research - vol. 3 - n. 1
Voir la fiche
-
Critical review of the influence of lubricants ...
- Auteurs : SHEN B., GROLL E. A.
- Date : 07/2005
- Langues : Anglais
- Source : HVAC&R Research - vol. 11 - n. 3
Voir la fiche
-
Przejmowanie ciepla i opory przeplywu przy wrze...
- Auteurs : DAWIDOWICZ B., CIESLINSKI J. T.
- Date : 04/2011
- Langues : Polonais
- Source : Technika Chlodnicza i Klimatyzacyjna - vol. 18 - n. 182
- Formats : PDF
Voir la fiche