Document IIF
Caractéristiques de transfert de chaleur et de chute de pression d'un écoulement d'air humide dans une mousse métallique sous conditions de déshumidification: modèle numérique et validation expérimentale.
Heat transfer and pressure drop characteristics of wet air flow in metal foam under dehumidifying conditions: numerical model and experimental validation.
Résumé
In the present study, the heat transfer and pressure drop characteristics of wet air flow in metal foams under dehumidifying conditions were investigated numerically. The numerical models of water droplet formation, growth and movement were developed; the mass transfer rate model during droplet formation process was obtained based on the heterogeneous nucleation rate and critical nucleation radius of droplet; the mass transfer rate model for droplet growth was developed based on the species conservation of water vapor on phase interface between the droplet and the moist air; the contact angle model of the droplet was developed based on the force analysis of droplets on the ligament. Both the models of mass transfer rate contact angle were reflected in the continuity, momentum and energy conservation equations as the mass source term and momentum term. The model prediction accuracy was verified based on the existing experimental data in the literature.
Documents disponibles
Format PDF
Pages : 8
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Heat transfer and pressure drop characteristics of wet air flow in metal foam under dehumidifying conditions: numerical model and experimental validation.
- Identifiant de la fiche : 30018362
- Langues : Anglais
- Source : 1st IIR International Conference of Cryogenics and Refrigeration Technology (ICCRT 2016). Proceedings: Bucharest, Romania, June 22-25, 2016.
- Date d'édition : 22/06/2016
- DOI : http://dx.doi.org/10.18462/IIR.ICCRT.2016.0028
Liens
Voir d'autres communications du même compte rendu (32)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Transfert de chaleur;
Transfert de masse - Mots-clés : Air humide; Déshumidification; Métal; Transfert de masse; Transfert de chaleur; Simulation; Mousse; Chute de pression
-
Influence of pore density and porosity on the w...
- Auteurs : LAI Z., HU H., DING G., et al.
- Date : 04/2018
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 88
- Formats : PDF
Voir la fiche
-
Heat transfer and pressure drop characteristics...
- Auteurs : HU H., LAI Z., DING G., et al.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche
-
Effect of oil on two-phase pressure drop of ref...
- Auteurs : HU H., ZHU Y., DING G., et al.
- Date : 03/2013
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 36 - n. 2
- Formats : PDF
Voir la fiche
-
Effect of inclination angles on the heat transf...
- Auteurs : KIM W. H., KIM M. H., CHOI J. C., et al.
- Date : 04/12/2002
- Langues : Anglais
- Source : Green breeze from Asia: frontiers of refrigerants, heat transfer and system.. ACRA-2002. Proceedings of the Asian conference on refrigeration and air conditioning.
Voir la fiche
-
Effect of oscillatory frequency on heat transfe...
- Auteurs : LEONG K. C., JIN L. W.
- Date : 02/2006
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 49 - n. 3-4
Voir la fiche