Partager

Comparaison des données sur les flux thermiques critiques d'eau et du frigorigène HFC-134a par l'utilisation de méthodes de modélisation fluide-fluide.

Comparison of the CHF data for water and refrigerant HFC-134a by using the fluid-to-fluid modelling methods.

Auteurs : CHUN S. Y., HONG S. D., CHO Y. S., et al.

Type d'article : Article

Résumé

CHF experiments in tubes and annulus cooled with HFC-134a have been performed. The HFC-134a and water CHF data have been compared by applying the Ahmad and the Katto modelling parameters. For the mass fluxes from 710 to 3500 kg/m2.s in the tubes, the HFC-134a and water CHF data fall close to the same curve on the plane of the dimensionless CHF vs. the Ahmad and the Katto modelling parameters. For the mass fluxes below 600 kg/m2.s in an annulus, the dimensionless CHFs as a function of the Ahmad and the Katto modelling parameters show a large difference between the HFC-134a and the water. The Katto and the Ahmad modelling parameters cannot be correlated with the dimensionless CHF data for HFC-134a and water on the same curve in the low mass flux and high quality conditions. [Reprinted with permission from Elsevier. Copyright, 2007].

Détails

  • Titre original : Comparison of the CHF data for water and refrigerant HFC-134a by using the fluid-to-fluid modelling methods.
  • Identifiant de la fiche : 2008-0501
  • Langues : Anglais
  • Source : International Journal of Heat and Mass Transfer - vol. 50 - n. 21-22
  • Date d'édition : 10/2007

Liens


Voir d'autres articles du même numéro (2)
Voir la source

Indexation