Partager

Étude numérique d'un condenseur refroidi par air forcé en utilisant le couplage 1D-3D.

Numerical investigation of a forced-air cooled condenser using 1D-3D-coupling.

Numéro : pap. 2585

Auteurs : ZUBER B., HOPFGARTNER J., EGGERS A., et al.

Résumé

To further improve the efficiency of refrigerators and freezers, it is necessary to optimize the whole cooling cycle. With one-dimensional numerical simulation programs, the transient behavior of the refrigeration cycle over more than 24 hours can be calculated. A major challenge here is to find appropriate heat transfer coefficients especially when the heat transfer is mainly influenced by forced-ventilation. In the present paper a wine cooler with a forced-air cooled condenser is investigated. To take the influences of the air flow and the condenser geometry on the simulated heat transfer into consideration, three-dimensional flow simulations are used. Due to superheating, subcooling and the transient behavior, the temperature varies across the condenser. Since the transferred heat strongly depends on the distribution of the temperature across the condenser surface, it would be necessary to run the 3D-CFD-simulation after every time step of the 1D simulation. To avoid this tremendous numerical effort, a more efficient method with so-called factors of influence is introduced. These factors of influence are calculated, using the results of around 30 CFD simulations, which are performed with different temperature distributions. After the determination of these factors, the heat transfer for a given condenser geometry can be calculated for different temperature distributions with a simple algebraic equation. To validate this procedure, CFD simulations with random temperature distributions are performed and compared with the results of the new method. The developed method has been implemented into the 1D cycle simulation. Thus it is possible to consider the geometry of the condenser and the complex flow field in the 1D simulation without a noticeable increase of the computational effort. Finally the results of the cycle simulation are validated with measurement results.

Documents disponibles

Format PDF

Pages : 10

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Numerical investigation of a forced-air cooled condenser using 1D-3D-coupling.
  • Identifiant de la fiche : 30024658
  • Langues : Anglais
  • Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
  • Date d'édition : 09/07/2018

Liens


Voir d'autres communications du même compte rendu (252)
Voir le compte rendu de la conférence

Indexation