Partager

Expériences sur le transfert de chaleur lors de l'ébullition du CO2 pur et des mélanges CO2/huile dans les tubes horizontaux lisses et à micro-ailettes.

Experiments on flow boiling heat transfer of pure CO2 and CO2-oil mixtures in horizontal smooth and micro-fin tubes.

Auteurs : GAO L., HONDA T.

Résumé

The smooth tube is a stainless steel tube with an inside diameter of 3 mm, and the micro-fin tube is a copper tube with a mean inside diameter of 3.04 mm. Experiments were carried out at mass velocities from 190 to 1300 kg/(m2.s), saturation temperature at 10°C, heat fluxes from 5 to 30 kW/m2, the circulation ratio of the oil (PAG) from lower than 0.01 to 0.72 wt%. In the case of almost pure CO2, the flow boiling heat transfer is dominated by nucleate boiling for both tubes. In the case of CO2-oil mixtures, the heat transfer coefficient is much lower than that of almost pure CO2. The result is considered due to the nucleate boiling being suppressed by the oil film. The dryout quality decreases greatly with the increase in mass velocity for the smooth tube, and is almost not influenced by the mass velocity for the micro-fin tube.

Documents disponibles

Format PDF

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Experiments on flow boiling heat transfer of pure CO2 and CO2-oil mixtures in horizontal smooth and micro-fin tubes.
  • Identifiant de la fiche : 2007-1494
  • Langues : Anglais
  • Source : 2006 Purdue Conferences. 18th International Compressor Engineering Conference at Purdue & 11th International Refrigeration and Air-Conditioning Conference at Purdue [CD-ROM].
  • Date d'édition : 17/07/2006

Liens


Voir d'autres communications du même compte rendu (157)
Voir le compte rendu de la conférence

Indexation