Document IIF

Les caractéristiques d'écoulement du coulis d'hydrate de clathrate de bromure d'ammonium tétra-n-butyle dans une tuyauterie coudée à 90°.

Flow characteristics of tetra-n-butyl ammonium bromide clathrate hydrate slurry in 90° elbow pipe.

Numéro : pap. n. 728

Auteurs : SHI X. J., ZHANG P.

Résumé

Tetra-n-butyl ammonium bromide (TBAB) clathrate hydrate slurry (CHS) is commonly used as a cold storage medium and secondary refrigerant in the secondary-loop refrigeration. In the present study, the flow characteristics of TBAB CHS in an elbow pipe were numerically investigated using Euler-Euler multiphase model, which was validated by comparing the numerical pressure drops with the experimental evidences. The numerical investigation was carried out at inlet velocity within a range of 1.0~3.0 m/s and inlet solid volume fraction within a range of 5.0~40.0 vol%. The numerical results showed that the solid particle distribution was more uniform at higher inlet velocity and solid volume fraction. Furthermore, in the elbow section, the primary flow accelerated near the inner wall and a secondary flow caused by the centrifugal force occurred on the cross-section of elbow section, which made solid particles agglomerate to the outer wall of the elbow section.

Documents disponibles

Format PDF

Pages : 8 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Flow characteristics of tetra-n-butyl ammonium bromide clathrate hydrate slurry in 90° elbow pipe.
  • Identifiant de la fiche : 30015448
  • Langues : Anglais
  • Source : Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
  • Date d'édition : 16/08/2015
  • DOI : http://dx.doi.org/10.18462/iir.icr.2015.0728

Liens


Voir d'autres communications du même compte rendu (657)
Voir le compte rendu de la conférence