Document IIF
Modélisation CFD 3D de turbines de détente à double vis en utilisant l'équation d'état des gaz réels et REFRPROP.
3D CFD modelling of twin screw expanders using real gas equation of state and REFRPROP.
Numéro : 0434
Auteurs : RANE S., KOVACEVIC A.
Résumé
A twin screw expander’s working chamber can be modelled in detail using 3D CFD and for a given operating condition the rotor configuration can be improved to achieve optimum internal expansion and maximize power recovery. In literature, it has been reported that use of an accurate fluid property definition such as NIST REFPROP database is essential to reproduce accurate pressure and temperature changes in the expansion chamber. However, when applied in the framework of a transient, 3D CFD computation, such databases have shown to increase the computational time by more than 50%. A numerically efficient alternative is to use a cubic equation of state. In this paper, some of the cubic equation of state definitions available in the ANSYS CFX flow solver for dry real gas properties have been evaluated in the application of an R245fa twin screw expander. The expander has a 4-5 lobe combination, ‘N’ rotor profile and a built-in volumetric expansion ratio of 4.5. Expander performance has been evaluated at 544 kPa filling pressure at 94.26℃ using SCORG generated rotor grids for expander chamber, port grids for high pressure and low pressure ports. CFD results have been reported in terms of the internal pressure and temperature variation, mass flow rate, and indicated power output. Under the same operating condition, the CFD computational model is evaluated using NIST REFPROP database and the deviation in results are compared.
Documents disponibles
Format PDF
Pages : 8
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : 3D CFD modelling of twin screw expanders using real gas equation of state and REFRPROP.
- Identifiant de la fiche : 30028202
- Langues : Anglais
- Source : 10th IIR Conference on Compressors and Refrigerants.
- Date d'édition : 13/01/2021
- DOI : http://dx.doi.org/10.18462/iir.compr.2021.0434
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Liens
Voir d'autres communications du même compte rendu (35)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Systèmes de détente;
HFC - Mots-clés : Vis; Modélisation; Machine de détente; Équation d'état; R245fa; Pression; Température; Rankine; CFD
-
Analysis of real gas equation of state for CFD ...
- Auteurs : RANE S., KOVACEVIC A., STOSIC N., SMITH I.
- Date : 01/2021
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 121
- Formats : PDF
Voir la fiche
-
Unsteady numerical simulation of scroll expande...
- Auteurs : PENG B., LI Y., ZHAO S.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Numerical modeling of a two-phase twin-screw ex...
- Auteurs : BIANCHI G., KENNEDY S., ZAHER O., et al.
- Date : 04/2018
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 88
- Formats : PDF
Voir la fiche
-
Numerical study on the internal characteristics...
- Auteurs : SHEN L., WANG W., WU Y. T., et al.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
New insights in twin screw expander performance...
- Auteurs : PAPES I., DEGROOTE J., VIERENDEELS J.
- Date : 05/12/2015
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 91
Voir la fiche