Modélisation transitoire et analyse de sensibilité d'un compresseur régulé au R-744 à plateau oscillant.
Transient modelling and sensitivity analysis of a controlled R-744 swash plate compressor.
Auteurs : CAVALCANTE P., FÖSTERLING S., TEGETHOFF W., et al.
Résumé
The focus of this investigation is the development of an advanced transient model to describe the operation of a controlled swash plate compressor for an automotive air-conditioning system using the natural refrigerant R-744. The over-all model consists of several partial models, that describe the thermodynamic laws in the control volumes of the cylinders, the suction and discharge chamber as well as the crankcase, the heat transfer, the dynamics and friction of the swash plate and the pistons, the valve behaviour, the piston leakage and the control valve mass flows. Based on measured data from the literature a validation is carried out under stationary full load operation conditions. The main focus of this investigation and the achieved progress compared to the state-of-the-art are the simulative linkage of the sub models in one complete model: the dynamic modelling of pistons and swash plate taking into account the impact of each individual piston on each other. An extensive sensitivity analysis was carried out to achieve a better understanding of the over-all compressor model behaviour. Based on this analysis, the model and geometric parameters with a significant impact on the main model's variables and efficiencies were identified in each sub model. A subsequent goal is the generation of a compressor characteristic to provide compressor efficiencies for cycle simulations.
Documents disponibles
Format PDF
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Transient modelling and sensitivity analysis of a controlled R-744 swash plate compressor.
- Identifiant de la fiche : 2009-0353
- Langues : Anglais
- Source : 2008 Purdue Conferences. 19th International Compressor Engineering Conference at Purdue & 12th International Refrigeration and Air-Conditioning Conference at Purdue [CD-ROM].
- Date d'édition : 14/07/2008
Liens
Voir d'autres communications du même compte rendu (125)
Voir le compte rendu de la conférence
Indexation
-
Simulation and performance analysis of control ...
- Auteurs : TIAN C., XU H., LI X., et al.
- Date : 08/2007
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 27 - n. 11-12
Voir la fiche
-
Derzeitige and zukünftige Anforderungen an Kält...
- Auteurs : KAISER H.
- Date : 01/09/1999
- Langues : Allemand
- Source : Compressors '99. The almanac of proceedings from the conference.
Voir la fiche
-
MAC simulation using MODELICA/Dymola.
- Auteurs : STRUPP C., LEMKE N., TEGETHOFF W., et al.
- Date : 29/05/2006
- Langues : Anglais
- Source : 7th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2006). Proceedings
- Formats : PDF
Voir la fiche
-
A CO2 vapour compression system for vehicle air...
- Auteurs : PETTERSEN J.
- Date : 27/09/1993
- Langues : Anglais
- Source : Proceedings of the 1993 non-fluorocarbon insulation, refrigeration and air-conditioning technology workshop.
Voir la fiche
-
Characterization and simulation of an open pist...
- Auteurs : ORTEGA SOTOMAYOR P., REIS-PARISE J. A.
- Date : 01/2016
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 61
- Formats : PDF
Voir la fiche