Document IIF

Non-newtonian flow modelling and pressure-drop prediction of ice slurry in a helical tube.

Numéro : 0028

Auteurs : SUN W., LI J., FANG Y., ZHANG B.

Résumé

Ice-slurry pressure-drop prediction in helical tubes is difficult because apparent slurry rheology, curvature-induced secondary flow and ice-particle redistribution are coupled. In this study, ice slurry prepared from a 0.9 wt% NaCl aqueous solution by the supercooling method was tested in a helical tube with an inner diameter of 6.4 mm and a coil diameter of 0.60 m. At IPF approximately 9.419% and Re=200-800, quasi-Newtonian correlations and non-Newtonian models were compared using the measured friction factor. The power-law model gave the best agreement, with RMSE=1.298,
MAPE=9.61%, maximum relative error=20.41% and R2=0.865, and was then used to predict the pressure distribution along the helical tube. The results indicate that the power-law model can describe the main pressure-drop trend within the present geometry, but its parameters should be interpreted as helical-tube apparent resistance parameters rather than geometry-independent rheological constants.

Documents disponibles

Format PDF

Pages : 8 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Non-newtonian flow modelling and pressure-drop prediction of ice slurry in a helical tube.
  • Identifiant de la fiche : 30035375
  • Langues : Anglais
  • Sujet : Technologie
  • Source : 15th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings:  Xi'an China, September 16-18, 2026.
  • Date d'édition : 09/2026
  • DOI : http://dx.doi.org/10.18462/iir.pcm.2026.0028

Liens


Voir d'autres communications du même compte rendu (43)
Voir le compte rendu de la conférence