Document IIF

Performance thermique des pompes à chaleur géothermiques utilisant un système de détente direct.

Thermal performance of ground source heat pumps that use direct expansion system.

Numéro : pap. n. 477

Auteurs : TAKEDA T., TANAKA D., YOKOYAMA D., et al.

Résumé

Ground source heat pumps (GSHPs) use buried pipes to extract heat from the ground. This heat can be used in radiators, in under-floor and warm-air heating systems, and in hot water heaters in houses. In a conventional GSHP, which uses an indirect heat exchange method, vertical systems use two long pipes connected by a U-shaped fitting at the bottom of a hole bored in the ground. These pipes form part of a closed loop, through which a mixture of water and antifreeze circulate. In contrast, a GSHP that uses a direct expansion method circulates a mixed refrigerant through the ground loop. In our tests of this method, the depth of the borehole was 30 m, and the refrigerant was R410A. The coefficients of performance (COP) were obtained for the direct expansion type of GSHP running in the cooling and the heating mode. It was found that the COP in the cooling mode and the heating mode was over 9 and 4.8, respectively.

Documents disponibles

Format PDF

Pages : 10 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Thermal performance of ground source heat pumps that use direct expansion system.
  • Identifiant de la fiche : 30015918
  • Langues : Anglais
  • Source : Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
  • Date d'édition : 16/08/2015
  • DOI : http://dx.doi.org/10.18462/iir.icr.2015.0477

Liens


Voir d'autres communications du même compte rendu (657)
Voir le compte rendu de la conférence