Partager

Document IIF

Performances des ensembles de compresseurs intégrés au R744 , partie 1 : estimation du débit massique du compresseur à partir des modèles axés sur les données, à l’aide de méthodes analytiques et de mesures réelles sur le terrain. 

Performance of integrated R744-packs part 1: compressor mass flow estimation based on data-driven models using analytical methods and actual field measurements

Numéro : 0390

Auteurs : KHORSHIDI V., KRIEZI E. E., SCHLEMMINGER C., HAFNER A., SOYLEMEZ E.

Résumé

Rising concerns for climate change impacts along with the new legislation aimed at lowering emissions indicates the inevitable transition in the cooling/heating industry towards a more energy-efficient solution with minimal environmental impact. Integrated refrigeration, air condition and heat recovery solutions by CO2 (R744) packs are efficient solutions to high energy demanding building (supermarkets and hotels). Proven performance enhancement of Multi Ejector SolutionTM makes the R744 systems more energy efficient, especially in warm climates, compared to the most conventional synthetic refrigerant systems in food retail applications.
Pilot installation in the frame of MultiPACK, an EU funded project (Horizon 2020), provided a wide range of data, offering the possibility of evaluating the real performance of each ejector group: high pressure (HP), low pressure (LP) and liquid ejector (LE), by running the system in different operating modes. Analysis of the data indicated performance improvement of a system with ejector, on average a 35% lower energy consumption compared to baseline parallel compression R744 system without ejectors.
Availability of mass flow measurement, 5 Coriolis mass flow meters on this pilot, enabled the possibility of comparison of mass flow rate estimation based on data acquisition from compressors with actual
measurement. Methods utilized include: Energy balance, volumetric displacement, manufacturer polynomials, and data-driven method. The comparison reveals the importance of compressor suction and
discharge parameters for obtaining reliable results based on energy balance, volumetric displacement, manufacturer polynomials methods. The current study shows data-driven method performs well after
enough training time with error bounded to 3% and 10 % on low and medium temperature level compressors, respectively.

Documents disponibles

Format PDF

Pages : 9

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Performance of integrated R744-packs part 1: compressor mass flow estimation based on data-driven models using analytical methods and actual field measurements
  • Identifiant de la fiche : 30028217
  • Langues : Anglais
  • Sujet : Alternatives aux HFC
  • Source : 10th IIR Conference on Compressors and Refrigerants.
  • Date d'édition : 13/01/2021
  • DOI : http://dx.doi.org/10.18462/iir.compr.2021.0390
  • Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.

Liens


Voir d'autres communications du même compte rendu (35)
Voir le compte rendu de la conférence

Indexation