Propriétés du givre sur le tube et les ailettes sous des conditions de fonctionnement d'une pompe à chaleur.
Frost properties on the fin and tube under heat pump condition.
Auteurs : LEE Y. S., YOON S. H., HAYASE G., et al.
Résumé
This study experimentally investigated the frost patterns on simple geometries such as flat plate and circular tube to propose the empirical correlation equations for the local and average frost thickness, frost density and frost mass of frosted evaporator of the heat pump. The key test parameters were air temperature from 2 to 7°C, absolute humidity of air from 2.98 to 4.16 g/kg(DA), air velocity from 1 to 2 m/s, and surface temperature of the flat plate from -5 to -15°C. The coolant was 50% ethylene-glycol aqueous solution. This study also measured the frost thickness and the frost mass on a fin and tube to compare with the values predicted by the fin and tube model utilizing the correlation equations for the flat plate and circular tube. The empirical correlations under the heat pump condition in this study predict more accurately than the other correlations that are available in the literatures. The frost on the space between the fin and the circular tube formed a meniscus as time passes. It caused the difference between the predicted and measured frost thickness and mass. The proposed correlation for the frost thickness agreed with the measured data within 5%, while the proposed correlation for the frost mass agreed with the measured data within 10%.
Documents disponibles
Format PDF
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Frost properties on the fin and tube under heat pump condition.
- Identifiant de la fiche : 2011-0205
- Langues : Anglais
- Source : IIR/Eurotherm sustainable refrigeration and heat pump technology conference. Proceedings of the Eurotherm Seminar No. 88, Stockholm, Sweden, June 13-16, 2010.
- Date d'édition : 13/06/2010
Liens
Voir d'autres communications du même compte rendu (49)
Voir le compte rendu de la conférence
Indexation
-
Frosting and defrosting characteristics of a fi...
- Auteurs : KIM K., LEE K. S.
- Date : 06/2011
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 54 - n. 13-14
Voir la fiche
-
Critical operating conditions for prevention of...
- Auteurs : YE H. Y., PARK J. S., LEE K. S.
- Date : 09/2014
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 76
Voir la fiche
-
Developing empirical correlations for frost thi...
- Auteurs : MOALLEM E., HONG T., CREMASCHI L., et al.
- Date : 16/07/2012
- Langues : Anglais
- Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Frost on a simple fin-tube under heat pump cond...
- Auteurs : YOON S., CHO K., HAYASE G.
- Date : 02/12/2009
- Langues : Anglais
- Source : Zbornik radova. 40. Medunarodni kongres o grejanju, hladenju i klimatizaciji./ Proceedings. 40th International congress on HVAC&R.
- Formats : PDF
Voir la fiche
-
Comparison of frost and defrost performance bet...
- Auteurs : PADHMANABHAN S., CREMASCHI L., FISHER D., et al.
- Date : 14/07/2008
- Langues : Anglais
- Source : 2008 Purdue Conferences. 19th International Compressor Engineering Conference at Purdue & 12th International Refrigeration and Air-Conditioning Conference at Purdue [CD-ROM].
- Formats : PDF
Voir la fiche