Document IIF

Revue de la méthodologie pour définir les facteurs de sécurité pour les frigorigènes inflammables A2L à retenir en fonction des normes de sécurité des produits.

Review of methodology to set safety factors for A2L flammable refrigerant being adopted by product safety standards.

Numéro : pap. n. 1118

Auteurs : KUJAK S., HANSEN B.

Résumé

This is the 16 slide PowerPoint presentation of Hansen and Kujak's paper.

Many new lower GWP refrigerants are flammable under certain conditions. Flammability risk can be lowered by reducing the potential for forming a refrigerant/air mixture that can reach the lower flammability limit (LFL) in the event of a leak into a confined space. Product standards are setting safety factors from 4x (25% of LFL) to 1x (100% of LFL) for A2L flammable refrigerants. This large discrepancy in safety factor practices is being driven by different methodologies in understanding of refrigerant leaks from equipment. Unfortunately when a leak occurs, uniform mixing of the refrigerant with the air does not occur immediately. This can result in localized refrigerant peak concentration that exceed the LFL which requires a safety factors to be applied to account for noise factors. An additional complication is that noise factors can vary by product application.

Documents disponibles

Format PDF

Pages : 16 slides

Disponible

Gratuit

Détails

  • Titre original : Review of methodology to set safety factors for A2L flammable refrigerant being adopted by product safety standards.
  • Identifiant de la fiche : 30024938
  • Langues : Anglais
  • Sujet : Généralités
  • Source : 1st IIR international conference on the application of HFO refrigerants, Birmingham, September 2-5 2018.
  • Date d'édition : 09/2018

Liens


Voir d'autres communications du même compte rendu (126)
Voir le compte rendu de la conférence