Partager

Simulation d'un appareil de fabrication de glace basé sur un nouveau composant sorbant à base de chlorure de lithium dans des pores de gel de silice.

Simulation of a solid sorption ice-maker based on the novel composite sorbent "lithium chloride in silica gel pores".

Auteurs : MAGGIO G., GORDEEVA L. G., FRENI A., et al.

Type d'article : Article

Résumé

In this paper, a novel composite sorbent "lithium chloride in silica gel pores" is proposed for application in solar-powered adsorptive ice makers. A mathematical model was used in order to calculate the performance of an ice-maker using this material as adsorbent and methanol as adsorbate. The results of the model showed that a maximum solar COP of 0.33 and a maximum daily ice production of 20 kg/m2 can be obtained for an ice-maker equipped with a solar collector area of 1.5 m2 and 36 kg of adsorbent material. Such performance are noticeably higher than those obtained using commercial activated carbon, that is the adsorbent mostly proposed till now. [Reprinted with permission from Elsevier. Copyright, 2008].

Détails

  • Titre original : Simulation of a solid sorption ice-maker based on the novel composite sorbent "lithium chloride in silica gel pores".
  • Identifiant de la fiche : 2009-2106
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 29 - n. 8-9
  • Date d'édition : 06/2009
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2008.07.026

Liens


Voir d'autres articles du même numéro (13)
Voir la source

Indexation