Simulation numérique de la configuration d'écoulement diphasique du dioxyde de carbone surcritique en présence d'huile lubrifiante de type PAG dans un refroidisseur de gaz

Numerical simulation of two-phase flow pattern of supercritical carbon dioxide with PAG-type lubricating oil in gas cooler.

Numéro : pap. 2540

Auteurs : DANG C., ANAI S., HIHARA E.

Résumé

It has been reported that lubricating oil has a significant influence on the cooling heat transfer of supercritical carbon dioxide. In this study, numerical analysis of the flow pattern of a carbon dioxide (CO2)-oil mixture in a gas cooler was conducted to analyze the change in oil film thickness and heat transfer coefficient against bulk temperature. Simulations were conducted using FLUENT software, and the volume-of-fluid model was applied to capture the interface of the lubricating oil and CO2. The compatibility of lubricants was found to have a dramatic influence on cooling heat transfer. The flow regime changes due to CO2 dissolving into the oil causing changes in viscosity, surface tension, and density of the oil film. The comparison of simulated heat transfer coefficients with experimental results showed that the numerical simulation is an effective approach to analyze the characteristics of the flow and heat transfer of supercritical CO2-oil mixture, and the numerical approach proposed could be further extended to the actual gas cooler design.

Documents disponibles

Format PDF

Pages : 11 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Numerical simulation of two-phase flow pattern of supercritical carbon dioxide with PAG-type lubricating oil in gas cooler.
  • Identifiant de la fiche : 30006602
  • Langues : Anglais
  • Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
  • Date d'édition : 16/07/2012

Liens


Voir d'autres communications du même compte rendu (195)
Voir le compte rendu de la conférence