Partager

Températures optimales dans un condenseur multitubulaire en relation avec l'exergie.

Optimum temperatures in a shell and tube condenser with respect to exergy.

Auteurs : HASELI Y., DINCER I., NATERER G. F.

Type d'article : Article, Synthèse

Résumé

This paper focuses on evaluation of the optimum cooling water temperature during condensation of saturated water vapour within a shell and tube condenser, through minimization of exergy destruction. First, the relevant exergy destruction is mathematically derived and expressed as a function of operating temperatures and mass flow rates of both vapour and coolant. The optimization problem is defined subject to condensation of the entire vapour mass flow and it is solved based on the sequential quadratic programming method. The optimization results are obtained at two different condensation temperatures of 46 and 54°C for an industrial condenser. As the upstream steam mass flow rates increase, the optimal inlet cooling water temperature and exergy efficiency decrease, whereas exergy destruction increases. However, the results are higher for optimum values at a condensation temperature of 54°C, compared to those when the condensation temperature is 46°C. For example, when the steam mass flow rate is 1 kg/s and the condensation temperature increases from 46 to 54°C, the optimal upstream coolant temperature increases from 16.78 to 25.17°C. Also, assuming an ambient temperature of 15°C, the exergy destruction decreases from 172.5 to 164.6 kW. A linear dependence of exergy efficiency on dimensionless temperature is described in terms of the ratio of the temperature difference between the inlet cooling water and the environment, to the temperature difference between condensation and environment. [Reprinted with permission from Elsevier. Copyright, 2007].

Détails

  • Titre original : Optimum temperatures in a shell and tube condenser with respect to exergy.
  • Identifiant de la fiche : 2008-2058
  • Langues : Anglais
  • Source : International Journal of Heat and Mass Transfer - vol. 51 - n. 9-10
  • Date d'édition : 05/2008

Liens


Voir d'autres articles du même numéro (7)
Voir la source

Indexation