Partager

Viscosité minimale pour la fiabilité des paliers des compresseurs rotatifs au R290.

Minimum viscosity for bearing reliability in R290 rotary compressors.

Numéro : pap. 1336

Auteurs : ZHOU X., JIANG B., GAO Q., et al.

Résumé

R290 which has been considered for use in room air conditioning systems as low global warming potential (GWP) refrigerant has attracted great attention. This refrigerant is determined the lubrication performance of the sliding parts (especially the bearings) in rotary compressor. It is important to prevent the sliding parts from seizure and wear. To ensure the bearing reliability, it is traditional for R290 compressor manufacturer to specify a minimum oil sump temperature difference above the saturated discharge temperature. It is a surrogate measure of minimum viscosity required to ensure adequate lubricant film thickness in bearings under the system flooding conditions. The minimum viscosity depends on the bearing geometry, the load and the speed. This paper describes a method for specifying the minimum safe viscosity of the high-side R290 rotary compressors based on lubricant film thickness calculations.

Documents disponibles

Format PDF

Pages : 8 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Minimum viscosity for bearing reliability in R290 rotary compressors.
  • Identifiant de la fiche : 30007000
  • Langues : Anglais
  • Source : 2012 Purdue Conferences. 21st International Compressor Engineering Conference at Purdue.
  • Date d'édition : 16/07/2012

Liens


Voir d'autres communications du même compte rendu (82)
Voir le compte rendu de la conférence

Indexation