Document IIF

Étude de cas d'éjecteurs au R744 par mécanique des fluides numérique.

CFD case study of R744 ejectors.

Numéro : pap. ID107

Auteurs : BANASIAK K., HAFNER A., EIKEVIK T., et al.

Résumé

Based on a three-dimensional CFD code developed in Fluent ANSYS environment, a sample geometry of the R744 vapor ejector was numerically analyzed. The energy performance, represented by the ejector efficiency, was simulated for three distinctive sets of boundary conditions. Also, to investigate the local irreversibility effects inside the ejector passages, one-dimensional profiles of pressure, the Mach number, and the cross-section averaged specific entropy were analyzed. For all the cases a relatively low percentage of the total irreversibility is found to occur in the motive and suction nozzles, i.e., less than 15% in total for both nozzles. On the other hand, high losses were registered for mixer and diffuser, up to 49% and 63% of the total irreversibility, accordingly. The CFD simulations were validated against the results of laboratory experiments, finding some discrepancy between the measured and entrained mass flow rates. It was concluded that these discrepancy could arise from the combination between the model assumptions and boundary values.

Documents disponibles

Format PDF

Pages : 8 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : CFD case study of R744 ejectors.
  • Identifiant de la fiche : 30012534
  • Langues : Anglais
  • Source : 11th IIR Gustav Lorentzen Conference on Natural Refrigerants (GL2014). Proceedings. Hangzhou, China, August 31-September 2, 2014.
  • Date d'édition : 02/08/2014

Liens


Voir d'autres communications du même compte rendu (119)
Voir le compte rendu de la conférence