Document IIF

Vane-roller separation and impact analysis for rotary compressors via tribo-dynamics modeling and experimental validation.

Auteurs : WANG L., TAN S., LIU Z., ZHOU C., LIU D., CHENG S., MENG X.

Type d'article : Article de la RIF

Résumé

Rotary compressors are widely used in air-conditioning systems, but their operational stability and acoustic performance can be adversely affected by vane-roller separation and the resulting impact noise. To better understand this problem and support forward design for noise reduction and stability improvement, a multibody coupled tribo-dynamic model of the vane system in a rotary compressor is established in this study. By evaluating both the magnitude and orientation of the contact force at the vane tip-roller interface, vane separation can be identified and the dominant source of vane impact noise can be analyzed. The numerical method is validated experimentally, and good agreement is obtained between the simulated results and the measured abnormal vibration characteristics. The results show that the contact state between the vane tip and the roller is mainly governed by the suction-discharge pressure difference, spring force, and crankshaft rotational speed. The parametric analysis further indicates that increasing the suction-discharge pressure difference and spring force can effectively suppress vane separation, whereas increasing crankshaft speed promotes separation and repetitive impact. These findings provide useful guidance for the design and operating condition optimization of low noise rotary compressors.

Documents disponibles

Format PDF

Pages : 10 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Vane-roller separation and impact analysis for rotary compressors via tribo-dynamics modeling and experimental validation.
  • Identifiant de la fiche : 30035320
  • Langues : Anglais
  • Sujet : Technologie
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 190
  • Date d'édition : 10/2026
  • DOI : http://dx.doi.org/https://doi.org/10.1016/j.ijrefrig.2026.107036

Liens


Voir d'autres articles du même numéro (29)
Voir la source