Summary
Rotary compressors are widely used in air-conditioning systems, but their operational stability and acoustic performance can be adversely affected by vane-roller separation and the resulting impact noise. To better understand this problem and support forward design for noise reduction and stability improvement, a multibody coupled tribo-dynamic model of the vane system in a rotary compressor is established in this study. By evaluating both the magnitude and orientation of the contact force at the vane tip-roller interface, vane separation can be identified and the dominant source of vane impact noise can be analyzed. The numerical method is validated experimentally, and good agreement is obtained between the simulated results and the measured abnormal vibration characteristics. The results show that the contact state between the vane tip and the roller is mainly governed by the suction-discharge pressure difference, spring force, and crankshaft rotational speed. The parametric analysis further indicates that increasing the suction-discharge pressure difference and spring force can effectively suppress vane separation, whereas increasing crankshaft speed promotes separation and repetitive impact. These findings provide useful guidance for the design and operating condition optimization of low noise rotary compressors.
Available documents
Format PDF
Pages: 10 p.
Available
Public price
20 €
Member price*
Free
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Vane-roller separation and impact analysis for rotary compressors via tribo-dynamics modeling and experimental validation.
- Record ID : 30035320
- Languages: English
- Subject: Technology
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 190
- Publication date: 2026/10
- DOI: http://dx.doi.org/https://doi.org/10.1016/j.ijrefrig.2026.107036
Links
See other articles in this issue (29)
See the source
Indexing
-
Themes:
Compressors;
Compression systems - Keywords: Rotary compressor; Separation; Noise; Modelling; Expérimentation
-
Physics-inspired reduced order and refrigerant ...
- Author(s) : KHAN A., BRADSHAW C. R.
- Date : 2026/01
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 181
- Formats : PDF
View record
-
Investigation on improving the high-speed perfo...
- Author(s) : MENG X., LI J., GU H., LI W., BAI X., XU X., LI D., QIAO D., SHEN K., ZHENG Y.
- Date : 2025/11
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 179
- Formats : PDF
View record
-
Vapour compression refrigerating machines.
- Author(s) : PANNO G.
- Date : 1994
- Languages : Italian
- Source: Industria & Formazione - vol. 18 - n. 5
View record
-
Nonlinear dynamic modeling and analysis of orbi...
- Author(s) : YANG X-L., PENG B., QI X-Y., SHI J-F., LIAO Z-X., ZHANG Y-B.
- Date : 2026/01
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 181
- Formats : PDF
View record
-
Vane back-pressure of vane type compressors and...
- Author(s) : FUKUTA M., YANAGISAWA T., IJIRI M., et al.
- Date : 2003
- Languages : English
- Source: Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers - vol. 20 - n. 3
View record