Résultats de recherche

  • Un système d'évaporateur à expansion directe à faible charge configuré pour utiliser moins d'ammoniac

    Aux Etats-Unis, une usine de transformation de viande exploite un entrepôt frigorifique utilisant seulement 1 kg d'ammoniac par kW.

    • Date de publication : 17/05/2018
  • Une méthode innovante de détection du givre

    La formation de givre sur les serpentins de l’évaporateur d’une installation frigorifique peut considérablement réduire son efficacité. Une nouvelle méthode de détection indirecte qui permettrait d’éviter l’accumulation de givre a été développée.

    • Date de publication : 06/02/2020
  • ICR2011 highlights: cooling particle detectors

    Cooling systems for particle detectors attracted interest at the IIR’s Congress in Prague in August 2011. These highly specific applications have very strict requirements compared with standard cooling systems: refrigerants should be resistant to...

    • Date de publication : 21/02/2012
  • Micro-refrigeration

    Future computer chips will probablly generate 10 times more heat than today's microprocessors and will require new types of cooling systems. Currently, computers are usually cooled thanks to fans and small finned devices called heat sinks, but the...

    • Date de publication : 12/08/2008
  • Micro-Innovation

    Mechanical engineers at Purdue University have created a miniature device that aims to replace conventional evaporators. Cited as a "long-term solution" in technological advances, the use of existing technical know-how for the refrigeration loop...

    • Date de publication : 19/07/2005
  • Solar cooling: Low-cost solar vaccine refrigerator

    About 2 million people around the world die each year of diseases preventable by widely used vaccines. In Africa and parts of Asia, over half of all vaccines that require refrigeration spoil before they can be administered. Millions of lives and...

    • Date de publication : 04/02/2011
  • Briefs: AHR Exposition Award

    This year the winner of AHR Exposition Award was Delphi Corp.'s innovative micro channel evaporator, capable of performing both cooling and heating functions for residential or commercial settings. It is highly efficient as it uses a compact...

    • Date de publication : 07/03/2010
  • Briefs: First MAC system using an ejector

    Denso Corporation has developed the world's first passenger mobile air-conditioning system that uses ejector technology. The ejector, which is a small refrigerant injector, was installed on the new Prius introduced by Toyota in May 2009. According...

    • Date de publication : 13/08/2009
  • New solar-cooling technology for cooling-freezing

    Refrigeration is often based on compressor technology which consumes electricity. A recently developed system making it possible to achieve relatively low temperatures solely using solar energy has been designed by PROMES, a laboratory working...

    • Date de publication : 04/05/2007
  • Briefs: Embraco's new miniature compressor

    In Newsletter No. 35, we reported on research, especially at Purdue University, on the design of miniature evaporators and compressors. Still in the testing phase, but already considered a technological innovation, Embraco's new miniature...

    • Date de publication : 18/05/2009
  • Un système frigorifique à éjecteur optimisé pour des températures négatives sur les navires de pêche

    De grandes quantités de carburant diesel sont utilisées pour alimenter les moteurs des navires de pêche et les systèmes frigorifiques à bord. Une étude théorique récente a proposé un système frigorifique pour...

    • Date de publication : 31/05/2021
    • Sujets : Technologie
  • ICR 2019: tour d'horizon des thèmes de recherche actuels dans le froid (partie III)

    Le stockage d’énergie, le conditionnement d’air à déshydratant, les pompes à chaleur haute température ou encore les technologies à éjecteur ont constitué quelques-uns des thèmes dominants du dernier congrès de l’IIF. Suite de la synthèse des...

    • Date de publication : 30/10/2019
  • CO2 applications: First hospital catering facility refrigeration system to run with CO2 in the UK

    A CO2 unit supplied by Green & Cool has been installed and commissioned by CCS Refrigeration, through Aggora on behalf of Medirest to provide for the on-site catering requirements of patients, restaurant and hospital staff at the Homerton...

    • Date de publication : 07/02/2011
  • Chillers: efficiency takes off

    Chillers are key refrigerating systems since, according to the Department of Energy, in the US, they account for about 13% of the power consumed by the nation's buildings and 9% of the overall demand for electric power. Examples below illustrate...

    • Date de publication : 25/10/2008
  • Brief: System to go!

    Danfoss has been awarded its 4th consecutive Refrigeration Innovation Award for a completely self-contained refrigeration system. The Interchangeable Cooling Engine (I.C.E.) was designed for vending machine applications - it is already compliant...

    • Date de publication : 05/05/2006
  • La fabrication additive d’échangeurs de chaleur

    Dans l'industrie du froid, la fabrication additive (communément appelée « impression 3D ») permet de fabriquer des géométries d'échangeurs de chaleur novatrices, complexes et...

    • Dernière mise à jour : 07/09/2022
    • Langues : Anglais, Français
    • Thèmes : Evaporateurs, condenseurs et autres échangeurs thermiques
  • La fabrication additive de régénérateurs pour le froid calorique

    Dans de nombreux domaines de l’ingénierie, la fabrication additive permet d’obtenir des produits complexes et multifonctionnels qui ne pourraient pas être fabriqués à l’aide de...

    • Dernière mise à jour : 16/09/2022
    • Langues : Anglais, Français
    • Thèmes : Froid calorique (froid magnétocalorique, électrocalorique, élastocalorique et barocalorique)