Document IIF

Le froid au CO2 pour l'expérience LHCb-Velo au CERN.

CO2 cooling for the LHCb-Velo experiment at CERN.

Résumé

CO2 as evaporative coolant has gained interest for the use in high energy particle physics experiments. It is applied as coolant in the Vertex Locator (Velo) of the LHCb detector, which is an experiment at the Large Hadron Collider at CERN in Geneva. Silicon particle detectors like the Velo have special requirements on cooling. The sensors which are spread over a large volume must be kept at a stable low temperature of -7ºC at all times while the attached electronics generate a substantial amount of waste heat which has to be taken by the cooling system. The cooling infrastructure in the detector needs to be of low mass and the construction materials including the coolant need to be radiation resistant. CO2 as coolant is a good option for this application as it can withstand a large amount of radiation and has excellent thermal behaviour in small diameter tubes. The CO2 cooling system for the Velo uses the 2-phase accumulator controlled loop (2PACL) method. This method supplies low vapour quality CO2 into the evaporator at a constant pressure and requires no active components inside the radioactive environment. This paper describes the design of the Velo detector and the Velo thermal control system. It explains the 2PACL method. Test results of the VTCS are presented and experience gained during VTCS commissioning is described.

Documents disponibles

Format PDF

Pages : 2008-2

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : CO2 cooling for the LHCb-Velo experiment at CERN.
  • Identifiant de la fiche : 2009-1894
  • Langues : Anglais
  • Source : 8th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2008)
  • Date d'édition : 07/09/2008

Liens


Voir d'autres communications du même compte rendu (132)
Voir le compte rendu de la conférence