Partager

Document IIF

Méthode des différences finies pour le processus de congélation d’un bloc en utilisant des propriétés moyennes intégrales.

FDM for the freezing process of a slab using integral average properties.

Auteurs : FERREIRA S. R.

Type d'article : Article de la RIF

Résumé

The finite difference method (FDM) was used to calculate the temperature profile of the slab T(x,t) and freezing time (tcalc). The methodology is based on the integral average property (Pav) for each property P(T) (k, ρ, and Cpap), which is the integral of P(T) from the initial slab temperature (T0) up to a reference temperature (Tref), divided by the temperature range (Tref – T0). The objective is to obtain an adequate (Tref) and a set of appropriate P(T) for a given set of experimental data. Simulations were performed to test several (Tref), obtaining (tcalc), which was compared with 337 data from the slab freezing process. The principal findings were used to obtain the following parameters: minimum error Emin = -6.71 %, overall mean error Emean = -0.27 %, maximum error Emax = 5.84 %, and standard deviation σn-1 = 1.69 %. When the Biot number is large, Bif → ∞, Tref = Tarith or Tref = T(i) is generally adequate to calculate (tcalc), (Tarith) being the average arithmetic temperature and T(i) temperature at a point (i), respectively. If Bif → 0, Tref = Tcf generally produces good results for (tcalc), (Tcf) being the final temperature in the center of the slab. If the traditional Biot number Bi → 0, the average temperature (Tav) → (Tc), obtained from the analytical solution with the convective boundary condition for a slab, (Tc) being the center temperature. If Bi → ∞, (Tav) → (Ta) + (2/π)(Tc - Ta), (Ta) being the ambient temperature.

Documents disponibles

Format PDF

Pages : 326-339

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : FDM for the freezing process of a slab using integral average properties.
  • Identifiant de la fiche : 30027806
  • Langues : Anglais
  • Sujet : Technologie
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 119
  • Date d'édition : 11/2020
  • DOI : http://dx.doi.org/10.1016/j.ijrefrig.2020.07.026
  • Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.

Liens


Voir d'autres articles du même numéro (41)
Voir la source

Indexation