Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with regularly spaced helical screw-tape inserts.
Author(s) : SIVASHANMUGAM P., SURESH S.
Type of article: Article
Summary
Experimental investigation of heat transfer and friction factor characteristics of circular tube fitted with full-length helical screw element of different twist ratio, and helical screw inserts with spacer length 100, 200, 300, and 400 mm have been studied with uniform heat flux under turbulent flow condition. The experimental data obtained are verified with those obtained from plain tube published data. The effect of spacer length on heat transfer augmentation and friction factor, and the effect of twist ratio on heat transfer augmentation and friction factor have been presented separately. The decrease in Nusselt number for the helical twist with spacer length is within 10% for each subsequent 100 mm increase in spacer length. The friction factor for helical twist insert with spacer length 100 mm is very much close to value of friction factor for full-length helical twist for all Reynolds number and decreases by 5% for each 100 mm increment space length indicating that there is no much reduction in pumping power. Hence the helical screw inserts with spacer can only be used for heat augmentation only in turbulent flow with less reduction in pumping power. Empirical correlation were formed for explaining data and found to fit experimental data within plus or minus 10 and 20%, respectively, for Nusselt number and friction factor. [Reprinted with permission from Elsevier. Copyright, 2006].
Details
- Original title: Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with regularly spaced helical screw-tape inserts.
- Record ID : 2008-0546
- Languages: English
- Source: Applied Thermal Engineering - vol. 27 - n. 8-9
- Publication date: 2007/06
Links
See other articles in this issue (6)
See the source
Indexing
- Themes: Mass transfer
- Keywords: Geometry; Friction; Enhancement; Coefficient; Ribbed tube; Heat transfer; Turbulent flow; Heat exchanger; Pressure drop
-
PERIODICALLY CONVERGING-DIVERGING TUBES AND THE...
- Author(s) : SOUZA MENDES P., SPARROW E. M.
- Date : 1984/02
- Languages : English
- Source: J. Heat Transf. - vol. 106 - n. 1
View record
-
Enhancement of heat transfer by a combination o...
- Author(s) : ZIMPAROV V. D.
- Date : 2000/06/11
- Languages : English
- Source: Thermal sciences 2000. Proceedings of the ASME-ZSITS International Thermal Science Seminar + CD-ROM.
View record
-
A combined approach to predict friction coeffic...
- Author(s) : SARMA P. K., KISHORE P. S., RAO V. D., et al.
- Date : 2005/04
- Languages : English
- Source: International Journal of thermal Sciences - vol. 44 - n. 4
View record
-
Local and average transport coefficients for th...
- Author(s) : ALMEIDA J. A., MENDES P. R. Souza
- Date : 1992
- Languages : English
- Source: Exp. therm. Fluid Sci. - vol. 5 - n. 4
View record
-
Single-phase heat transfer and flow characteris...
- Author(s) : HAN D. H., LEE K. J.
- Date : 2005/08
- Languages : English
- Source: Applied Thermal Engineering - vol. 25 - n. 11-12
View record