IIR document

Experimental study on the flow and heat transfer characteristics of a tetra-n-butyl ammonium bromide hydrate slurry. 1. Flow characteristics.

Author(s) : KUMANO H., HIRATA T., KUDOH T.

Type of article: Article, IJR article

Summary

The flow characteristics of a tetra-n-butyl ammonium bromide hydrate slurry were investigated experimentally. Reynolds number, tube diameter and solid fraction were varied as the experimental parameters. For laminar flow, it was found that the ratio of the coefficients of pipe friction increases with solid fraction, and the rate of increase is high in the case of a low Reynolds number. For turbulent flow, the ratio of the coefficients of pipe friction was approximately 1 for all tube diameters at low solids fraction. It then decreased slightly at a particular solid fraction and increased again at high solid fraction. Theoretical analysis was carried out using the experimental results, and it was found that the flow characteristics of the hydrate slurry can be treated as those of a pseudoplastic fluid and clarified using the apparent Reynolds number.

Available documents

Format PDF

Pages: 1953-1962

Available

  • Public price

    20 €

  • Member price*

    Free

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).

Details

  • Original title: Experimental study on the flow and heat transfer characteristics of a tetra-n-butyl ammonium bromide hydrate slurry. 1. Flow characteristics.
  • Record ID : 30002289
  • Languages: English
  • Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 34 - n. 8
  • Publication date: 2011/12

Links


See other articles in this issue (40)
See the source