Share

IIR document

Flow and heat transfer characteristics of ammonium alum hydrate slurries.

Author(s) : SUZUKI H., KONAKA T., KOMODA Y., et al.

Type of article: Article, IJR article

Summary

Flow and heat transfer characteristics of ammonium alum hydrate slurries have been investigated. Ammonium alum hydrate has high latent heat of 251 kJ/kg and its melting temperature is 51°C when the concentration of ammonium alum in water was set at 35 wt%. The friction and the melting heat transfer coefficients were measured in a pipe flow with 13 mm of diameter. From the results, it was found that the friction coefficient of ammonium alum hydrate slurry shows almost the same value as that of water. On the other hand, the slurry shows higher heat transfer than that of water. Especially, the heat transfer enhanced rate becomes high when the temperature difference between the slurry and the heating flow was set small. This is because of the temperature sustainability of phase change material slurries. From this, it was concluded that ammonium alum hydrate slurry can be a promising candidate for a heating system.

Available documents

Format PDF

Pages: 81-87

Available

  • Public price

    20 €

  • Member price*

    Free

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).

Details

  • Original title: Flow and heat transfer characteristics of ammonium alum hydrate slurries.
  • Record ID : 30006446
  • Languages: English
  • Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 36 - n. 1
  • Publication date: 2013/01

Links


See other articles in this issue (24)
See the source

Indexing