A novel capacity controller for a three-evaporator air conditioning (TEAC) system for improved indoor humidity control.

Author(s) : YAN Y., DENG S., CHAN M. Y.

Type of article: Article

Summary

Using a multi-evaporator air conditioning (MEAC) system to correctly control indoor air temperatures only in a multi-room application is already a challenging and difficult task, let alone the control of both indoor air temperature and humidity. This is because in an MEAC system, a number of indoor units are connected to a common condensing unit. Hence, the interferences among operation parameters of different indoor units would make the desired control of an MEAC system hard to realize. Limited capacity control algorithms for MEAC systems have been developed, with most of them focusing only on the control of indoor air temperature, and no previous studies involving control of indoor air humidity using MEAC systems can be identified.
In this paper, the development of a novel capacity controller for a three-evaporator air conditioning (TEAC) system for improved indoor air humidity control is reported. The novel controller was developed by integrating two previous control algorithms for a dual-evaporator air conditioning system for temperature control and for a single-evaporator air conditioning system for improved indoor humidity control. Experimental controllability tests were carried out and the controllability test results showed that, with the novel controller, improved control over indoor humidity levels and better energy efficiency for a TEAC system could be obtained as compared to the traditional On–Off controllers extensively used by MEAC systems.

Details

  • Original title: A novel capacity controller for a three-evaporator air conditioning (TEAC) system for improved indoor humidity control.
  • Record ID : 30017644
  • Languages: English
  • Source: Applied Thermal Engineering - vol. 98
  • Publication date: 2016/04/05
  • DOI: http://dx.doi.org/10.1016/j.applthermaleng.2016.01.052

Links


See other articles in this issue (61)
See the source