Summary
The characteristics of local heat transfer and pressure drop were investigated experimentally for the vertical up-flow boiling of refrigerant R1234yf in two types of aluminum multi-port extruded tubes having 16 channels with a cross-section of 0.91 × 0.21 mm (tube A) and 40 channels with a cross-section of 0.34 × 0.21 mm (tube B). At an evaporating temperature of 15°C, the local heat transfer coefficient and pressure drop for heat flux ranging from 3-16 kW/m2 and mass flux ranging from 60-240 kg/m2s were measured. The heat transfer coefficient almost linearly decreased with increasing vapor quality in both tubes. As the vapor quality increased, the dry patch area became lager in these rectangular channels, which deteriorated the heat transfer performance significantly. Compared with the multi-port extruded tube (tube C) having 16 channels with a cross-section of 0.9 × 0.9 mm, at a mass flux of 60 kg/m2s, tube C demonstrated better heat transfer performance than tubes A and B. When the mass flux increased to 120 kg/m2s, the dry-out was alleviated in tubes A and B and better performance was observed for low vapor quality regions, while in high vapor quality regions the dry patch reoccupied the heat transfer area, thereby resulting in worse heat transfer performance in tubes A and B. The pressure drop was not effectively predicted by any of the three correlations investigated.
Available documents
Format PDF
Pages: 8
Available
Public price
20 €
Member price*
15 €
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Experimental investigation on up-flow boiling of R1234yf in aluminium multi-port extruded tubes.
- Record ID : 30018929
- Languages: English
- Source: 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Publication date: 2016/07/11
Links
See other articles from the proceedings (274)
See the conference proceedings
Indexing
-
R1234yf flow boiling heat transfer inside a 3.4...
- Author(s) : DIANI A., TAMURA M. T., MANCIN S., et al.
- Date : 2014/07/14
- Languages : English
- Source: 2014 Purdue Conferences. 15th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
View record
-
Flow boiling heat Transfer Characteristics of R...
- Author(s) : JIGE D., SAGAWA K., INOUE N.
- Date : 2016/07/11
- Languages : English
- Source: 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
View record
-
HFO1234ze(E) vaporisation inside a Brazed Plate...
- Author(s) : LONGO G. A., MANCIN S., RIGHETTI G., et al.
- Date : 2016/07
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 67
- Formats : PDF
View record
-
Boiling heat transfer and pressure drop of R134...
- Author(s) : MORTADA S., ZOUGHAIB A., ARZANO-DAURELLE C., et al.
- Date : 2012/06
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 35 - n. 4
- Formats : PDF
View record
-
HFO1234ze(E) and HFC134a flow boiling inside a ...
- Author(s) : LONGO G. A., MANCIN S., RIGHETTI G., et al.
- Date : 2016/07/11
- Languages : English
- Source: 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
View record