Summary
It is crucial to enhance the ejector capacity to widen its application in industry. A novel ejector with a bypass installed in the low pressure district is proposed to enhance the ejector capacity. The results show that there is an optimal position for the maximum entrainment ratio, which corresponds to the lowest pressure around the second shock position. When the ejector operates at design conditions (the primary/induced/back pressures are 0.3/0.02/0.08?MPa), the optimal length ratio is about 1.1. Then, the ejector performance with the optimal bypass is investigated under different operational parameters. It is found that the novel ejector has relatively high entrainment ratio and low critical back pressure compared to the ejector without bypass under the design condition. When the primary pressure is bigger than a certain value, the entrainment ratio would always improve as the primary or induced pressures increase.
Details
- Original title: A novel ejector with a bypass to enhance the performance.
- Record ID : 30017065
- Languages: English
- Source: Applied Thermal Engineering - vol. 93
- Publication date: 2016/01/25
- DOI: http://dx.doi.org/10.1016/j.applthermaleng.2015.10.067
Links
See other articles in this issue (72)
See the source
Indexing
-
Experimental investigation on ejector performan...
- Author(s) : WANG L., WANG C., HOU W., et al.
- Date : 2017/08
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 80
- Formats : PDF
View record
-
Experimental and numerical investigation of the...
- Author(s) : ZHU Y., JIANG P. X.
- Date : 2014/04
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 40
- Formats : PDF
View record
-
A one dimensional model for the determination o...
- Author(s) : GARCÍA del VALLE J., SAIZ JABARDO J. M., CASTRO RUIZ F., et al.
- Date : 2012/06
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 35 - n. 4
- Formats : PDF
View record
-
One dimensional model of an ejector with specia...
- Author(s) : SATHEESH KUMAR N., OOI K. T.
- Date : 2014/04
- Languages : English
- Source: Applied Thermal Engineering - vol. 65 - n. 1-2
View record
-
Upgrading of steam-water ejector refrigerating ...
- Author(s) : SIL'MAN M. A.
- Date : 1997
- Languages : Russian
- Source: Kholodilnaya Tekhnika - n. 6
View record