Share

AIRFLOW MEASUREMENTS AT COIL FACES WITH VANE ANEMOMETERS: EXPERIMENTAL RESULTS.

Author(s) : HOWELL R. H., SAUER H. J. Jr

Summary

THE USE OF THE K-FACTOR PROCEDURE, USING THE ROTATING VANE ANEMOMETER, HAS BEEN FOUND TO PREDICT VOLUME FLOW RATE THROUGH THE COIL WITH AN ACCURACY OF ABOUT 7%. A RECOMMENDED READING PATTERN CONSISTING OF THE STANDARD AND OFFSET LOCATIONS WITH A TOTAL OF 38 READINGS WAS FOUND TO BE MOST SATISFACTORY. LESS THAN 38 READINGS WILL GIVE ABOUT THE SAME ACCURACY IN PREDICTED VOLUME FLOW RATE, BUT THE NUMBER OF READINGS SHOULD NEVER BE LESS THAN 20. IT IS SHOWN THAT THE K-FACTOR IS A FUNCTION OF THE AVERAGE FACE VELOCITY, ROWS OF TUBES DEEP, FINS PER INCH, VERTICAL TUBE SPACING, AND TUBE OUTSIDE DIAMETER. UPSTREAM DISTURBANCES DID NOT AFFECT THE PREDICTED FLOW VELOCITY USING THE K-FACTOR PROCEDURE.

Details

  • Original title: AIRFLOW MEASUREMENTS AT COIL FACES WITH VANE ANEMOMETERS: EXPERIMENTAL RESULTS.
  • Record ID : 1991-0139
  • Languages: English
  • Publication date: 1989
  • Source: Source: ASHRAE Trans.
    vol. 95; n. 2; 128-140; 12 fig.; 2 tabl.; 11 ref.
  • Document available for consultation in the library of the IIR headquarters only.

Indexing