Effect of flow direction of heating medium on boiling heat transfer characteristics in a single-channel plate-fin heat exchanger.
Number: pap. 2416
Author(s) : SHIKICHI K., MINOURA K., ASANO H.
Summary
This study deals with evaporative heat transfer characteristics of vertically upward flows in single-channel plate-fin heat exchangers. R-134a was used as the refrigerant. The refrigerant channel was sandwiched by two water channels with the same channel shape. The refrigerant was heated by hot water from the both side. In this experiment, pressure of the working fluid was maintained at 0.665MPa (saturation temperature 25 ºC). Subcooled liquid with the subcooling of 5 and 10 K, or wet vapor with the quality of 0.1 was supplied to evaporator. Two kind of offset fin, Fin A and Fin B, whose fin pitch were 1.95 and 3.175 mm, respectively, were used. The channel hydraulic diameter with Fin A and Fin B were 1.78 and 2.89 mm, respectively. Effects of the fin pitch and flow direction of the heating water, such as counter and parallel flow arrangements, on the heat transfer rate, pressure drop, and wall temperature distribution on the outside of the water channel were examined. The wall temperature was visualized by an IR camera. As the results, it was shown that the effects of the water and the fin pitch on the heat transfer rate were a little due to a dryout in the refrigerant flows. However, a large difference in the wall temperature distribution between the counter and parallel flow was observed. The difference might be caused by the phase distribution of refrigerant, and lead to the increase in the pressure drop for the parallel flow. For the parallel flow arrangement, the temperature on the right side with the water inlet port was quite higher than the right side. The temperature distribution was kept over the heat exchanger. The tendency was weaker for Fin B with the lager fin pitch due to phase separation caused by gravity.
Available documents
Format PDF
Pages: 8
Available
Public price
20 €
Member price*
15 €
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Effect of flow direction of heating medium on boiling heat transfer characteristics in a single-channel plate-fin heat exchanger.
- Record ID : 30024542
- Languages: English
- Source: 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Publication date: 2018/07/09
Links
See other articles from the proceedings (252)
See the conference proceedings
Indexing
-
Oil circulation effects on evaporation heat tra...
- Author(s) : JANG J., CHANG Y., KANG B. H.
- Date : 2012/07/16
- Languages : English
- Source: 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
View record
-
Study on a CFD simulation of flow trend in plat...
- Author(s) : KIM S. S., SEONG Y. J., JEONG H. G., et al.
- Date : 2010/06/07
- Languages : English
- Source: ACRA2010. Asian conference on refrigeration and air conditioning: Tokyo, Japan, June 7-9, 2010.
- Formats : PDF
View record
-
Evaporation heat transfer and flow characterist...
- Author(s) : JIGE D., SUGIHARA K., INOUE N.
- Date : 2022/01
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 133
- Formats : PDF
View record
-
Heat transfer characteristics of condensing flo...
- Author(s) : ASANO H., HONDA K., KAWAGUCHI T., et al.
- Date : 2015/08/16
- Languages : English
- Source: Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
- Formats : PDF
View record
-
Flow boiling heat transfer of refrigerants HFO-...
- Author(s) : YANG C. Y., CHEN K., NALBANDIAN H.
- Date : 2019/08/24
- Languages : English
- Source: Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
View record